Setting a Star-Delta Timer: Transition and Changeover Time
How to set run-up time and transition (dead) time on a star-delta timing relay, with the arithmetic behind total cycle time and common setting mistakes.
9 min read
Technical
Setting guides
Guides and notes on industrial electrical and automation parts: selection, wiring, settings and ordering.
- Articles
- 6
- Latest
How to Test and Set an MPCB
A step-by-step commissioning procedure for setting the thermal dial to motor FLC and verifying trip-free, magnetic, phase-loss, and coordination behavior on an MPCB.
9 min read
How to Set a Voltage Monitoring Relay: Thresholds and Delay
A field guide to setting the trip threshold, hysteresis, and trip delay on a voltage monitoring relay so it protects the load without nuisance tripping.
10 min read
Setting an Overload Relay: FLC, Service Factor and the Dial
How to set a thermal or electronic overload relay dial to the motor's nameplate FLC, adjust for service factor, and avoid the mistakes that cause nuisance trips or burned windings.
10 min read
How to Select and Set a Thermal Overload Relay for a Motor
A step-by-step guide to reading motor nameplate FLC, matching relay range and frame, setting the dial, and picking the trip class for a thermal overload relay.
8 min read
How to Select and Set an MPCB for a Motor
A practical walkthrough of setting an MPCB's thermal dial to nameplate FLC, verifying the magnetic trip and trip class, and confirming Type 2 coordination with the contactor.
10 min read
Parts list
Sourcing a full parts list?
Paste your part numbers and quantities. We reply with price, stock and lead time per line.