- Home
- Servo Motors
- Siemens 1FL2203-2AF00-0HC0 SIMOTICS S-1FL2 200V 0.20kW Servo Motor Siemens 1FL2203-2AF00-0HC0 SIMOTICS S-1FL2 200V 0.20kW Servo Motor
Siemens 1FL2203-2AF00-0HC0 SIMOTICS S-1FL2 200V 0.20kW Servo Motor
Siemens 1FL2203-2AF00-0HC0 SIMOTICS S-1FL2 200V 0.20kW Servo Motor
Get Quote
- Description
The Siemens 1FL2203-2AF00-0HC0 is a SIMOTICS S-1FL2 servo motor for 200 V 3AC supply, rated 0.64 Nm / 0.20 kW at 3,000 rpm with 1.30 A rated current, a 30 mm shaft height, and a 17-bit absolute single-turn encoder for use with a SINAMICS S200 drive. Maximum output reaches 2.24 Nm and 4.80 A, and the IP54 housing runs without an oil seal on the shaft.
Technical Specifications
| Order Number | 1FL2203-2AF00-0HC0 |
| Brand | Siemens |
| Series | SIMOTICS S-1FL2 |
| EAN | 4034106450175 |
| Country of Origin | CN |
| Cooling | Natural cooling |
| Static Torque | 0.64 Nm |
| Static Current | 1.30 A |
| Maximum Torque | 2.24 Nm |
| Maximum Current | 4.80 A |
| Maximum Speed | 6,500 rpm |
| Rotor Moment of Inertia | 0.1800 kgcm² |
| Weight | 0.76 kg |
| Rated Speed | 3,000 rpm |
| Rated Torque | 0.64 Nm |
| Rated Current | 1.30 A |
| Rated Power | 0.20 kW |
| Encoder | Absolute single-turn, 17-bit |
| Connector | Hybrid connector |
| Protection Class | IP54, without oil seal |
| Shaft Height | 30 mm |
| Flange Size (AB) | 60.2 mm |
| Centering Ring (N) | 50 mm |
| Hole Circle (M) | 70 mm |
| Screw-on Hole (S) | 5.4 mm |
| Overall Length (LB) | 74 mm |
| Diameter of Shaft (D) | 14 mm |
| Length of Shaft (E) | 30 mm |
| Length of Flange Diagonal (P) | 81 mm |
Selection Notes
This is the smallest-frame motor in the SIMOTICS S-1FL2 range covered here, at 30 mm shaft height and 0.64 Nm rated torque, pick it for light single-axis loads where 0.2 kW rated power and 4.80 A maximum current are enough. It has no holding brake and IP54 protection without an oil seal, so it suits a clean or lightly contaminated cabinet environment rather than washdown duty. For higher torque within the same S-1FL2/S200 family, move up to the larger shaft-height variants.
Applications
Fits small single-axis motion tasks, such as light pick-and-place, small rotary tables, and lab or bench automation, driven by a SINAMICS S200 where load torque stays under roughly 0.6 Nm continuous.