- Home
- Schneider TeSys Deca Contactors
- Schneider Electric LC1D80E7 TeSys Deca Contactor 3P 3NO AC-3 80 A 48 V AC Coil Contactor Schneider Electric LC1D80E7 TeSys Deca Contactor 3P 3NO AC-3 80 A 48 V AC Coil Contactor
Schneider Electric LC1D80E7 TeSys Deca Contactor 3P 3NO AC-3 80 A 48 V AC Coil Contactor
Schneider Electric LC1D80E7 TeSys Deca Contactor 3P 3NO AC-3 80 A 48 V AC Coil Contactor
Get Quote
- Description
The Schneider Electric LC1D80E7 is a 3-pole TeSys Deca contactor rated 80 A AC-3 at up to 440 V, switching motors up to 37 kW at 400 V. It ships with a 48 V AC 50/60 Hz coil and a built-in 1 NO + 1 NC auxiliary block with a mirror-certified NC contact for interlocking.
Technical Specifications
| Reference | LC1D80E7 |
| Brand | Schneider Electric |
| Range | TeSys Deca |
| Product Type | Contactor |
| Poles | 3P, 3 NO |
| Utilisation Category | AC-3 / AC-3e / AC-1 / AC-4 |
| Rated Operational Current (Ie) AC-3 | 80 A at <= 440 V |
| Rated Operational Current (Ie) AC-1 | 125 A at <= 1000 V |
| Motor Power (AC-3, 400 V) | 37 kW |
| Control Circuit Voltage (Uc) | 48 V AC 50/60 Hz |
| Auxiliary Contacts | 1 NO + 1 NC built-in, NC mirror certified |
| Rated Breaking Capacity | 1100 A at 440 V |
| Rated Short-Time Withstand (Icw) | 990 A / 1 s |
| Rated Insulation Voltage (Ui) | 1000 V |
| Rated Impulse Withstand Voltage (Uimp) | 8 kV |
| IP Degree | IP20, front face |
| Max Operating Rate | 3600 cycles/h at 60 degrees C |
| Mounting | DIN rail or screw/plate |
| Dimensions (H x W x D) | 127 x 85 x 130 mm |
| Net Weight | 1.59 kg |
Certifications & Standards
- CCC
- UL
- CB Scheme
- CSA
- CE
- UKCA
- Marine
- EAC
- EN 60947-4-1
- EN 60947-5-1
- IEC 60947-4-1
- IEC 60947-5-1
- CSA C22.2 No 14
- UL 60947-4-1
Selection Notes
The built-in 1 NO + 1 NC auxiliary block covers start/stop and interlocking wiring without an add-on contact block, and the mirror-certified NC contact qualifies the pair for safety-related position monitoring per EN ISO 13849-1. Pick a sibling in the LC1D range only when the coil voltage differs or the load exceeds the 80 A AC-3 / 37 kW rating built into this frame; the 125 A AC-1 rating covers resistive loads above the motor-duty figure.
Applications
Direct-on-line motor starters up to 37 kW at 400 V, pump and fan control panels, and compressor starter cabinets where a 48 V AC control coil matches a low-voltage control transformer tap.