Schneider Electric XA2AW31M1 Easy Harmony XA2 Illuminated White Flush 22 mm 220 V AC 1NO Push Button

The Schneider Electric XA2AW31M1 is an Easy Harmony XA2 complete illuminated push button with a white flush head and an integral LED supplied at 220...230 V AC. It returns by spring after release, switches 1 NO contact through slow-break operation, and mounts in a 22.5 mm panel cutout sealed to IP65.

Technical Specifications

Certifications & Standards

• CCC
• CE
• UKCA
• GB 14048.1
• IEC 60947-1
• GB 14048.5
• IEC 60947-5-1

Selection Notes

The 220...230 V AC LED supply lets this button draw its pilot-light power straight from the control circuit's mains-derived rail, avoiding a dedicated 24 V supply where the panel is already built around 220 V control wiring - the main reason to pick this over the 24 V AC/DC XA2AW31B1. White follows IEC 60204-1 for general-purpose signalling where no specific colour convention applies, and the 1 NO contact gives a simple make-on-press command. Pick the matching coloured cap (XA2AW33/34/35/36 series, M-suffix for 220 V) where the panel needs a specific start, stop, or caution colour code instead.