- Home
- Redundancy, Selectivity & DC Converter Modules
- Siemens 6EP4437-7EB00-3DX0 SITOP SEL1400 8x1-5A Selectivity Module Siemens 6EP4437-7EB00-3DX0 SITOP SEL1400 8x1-5A Selectivity Module
Siemens 6EP4437-7EB00-3DX0 SITOP SEL1400 8x1-5A Selectivity Module
Siemens 6EP4437-7EB00-3DX0 SITOP SEL1400 8x1-5A Selectivity Module
Get Quote
- Description
The Siemens 6EP4437-7EB00-3DX0 is a SITOP SEL1400 selectivity module with 8 individually adjustable outputs (1-5 A each, set via potentiometer) fed from a 24 V DC input rated 40 A. Each channel trips independently on overcurrent, isolating a faulted branch circuit without dropping the shared 24 V supply to the rest of the panel.
Technical Specifications
| SKU / MLFB | 6EP4437-7EB00-3DX0 |
| Brand | Siemens |
| Series | SITOP SEL1400 |
| EAN | 4025515155430 |
| Input voltage DC, rated | 24 V, range 20.4-30 V |
| Input current, rated | 40 A |
| Number of outputs | 8 |
| Output current per channel | 1-5 A, adjustable via potentiometer |
| Output voltage | Vin minus approx. 0.2 V |
| Efficiency | 98% |
| Power loss, typical | 10 W |
| Overcurrent trip | 1.0-1.5x set value, trips after approx. 5 s |
| Current limitation trip | 1.5x set value, trips after typ. 100 ms |
| Immediate switch-off | Iout greater than set value and Vin below 20 V, approx. 0.5 ms |
| Protection class / IP | Class III, IP20 |
| Ambient temp, operation | -40 ... +70 C |
| Ambient temp, storage/transport | -40 ... +85 C |
| Dimensions (WxHxD) | 45 x 135 x 125 mm |
| Mounting | DIN rail EN 60715 35x7.5/15 |
| Net weight | 0.3 kg |
Certifications & Standards
- CE
- UKCA
- EAC
- CB
- Shipbuilding
- DNV
- EPD
Selection Notes
Eight independently adjustable 1-5 A outputs let SEL1400 give each load its own trip threshold on a shared 24 V rail, so one shorted sensor or valve branch drops out, indicated by its own LED, without taking down the other seven circuits; a simple fused terminal block cannot isolate branches this selectively. The 40 A input rating sizes it for larger DIN-rail distribution panels rather than single-load protection.
Applications
Distributes and protects multiple 24 V DC branch circuits, such as sensors, valves, and small actuators, from one SITOP power supply in control panels where a single-branch fault must not interrupt the whole 24 V rail.