- Home
- Power Quality, Metering & Power Supplies
- Siemens 6EP3336-7SC00-3AX0 SITOP PSU6200 Ex 24V/20A Power Supply Siemens 6EP3336-7SC00-3AX0 SITOP PSU6200 Ex 24V/20A Power Supply
Siemens 6EP3336-7SC00-3AX0 SITOP PSU6200 Ex 24V/20A Power Supply
Siemens 6EP3336-7SC00-3AX0 SITOP PSU6200 Ex 24V/20A Power Supply
Get Quote
- Description
The Siemens 6EP3336-7SC00-3AX0 is a SITOP PSU6200 Ex power supply that converts a 120-240 V AC input into a stabilized 24 V DC output rated 20 A, 24 A up to 45 degrees C. Coated circuit boards and ATEX/IECEx Ex ec nC IIC T4 Gc certification qualify it for Zone 2 hazardous areas, and it reaches 95.5% efficiency at 480 W typical supplied power.
Technical Specifications
| SKU | 6EP3336-7SC00-3AX0 |
| Brand | Siemens |
| Series | SITOP PSU6200 Ex |
| Product Designation | Power supply SITOP PSU6200 |
| Input Type | 1-phase AC or DC, wide range |
| Input Voltage | AC 120 ... 240 V / DC 110 ... 240 V |
| Line Frequency | 50/60 Hz |
| Output Voltage | 24 V DC, adjustable 24-28 V via potentiometer |
| Output Current, rated | 20 A (24 A up to +45 °C) |
| Supplied Power, typical | 480 W |
| Efficiency | 95.5 % |
| Power Loss, typical / no-load | 25 W / 2.6 W |
| Diagnostic Output | Electronic contact for DC O.K. / diagnostic interface |
| Hazardous Area Rating | ATEX (Ex) II 3G Ex ec nC IIC T4 Gc / IECEx Ex ec nC IIC T3 Gc |
| PCB Coating | Coated printed circuit boards |
| Overvoltage Protection | < 32 V |
| Short-Circuit Protection | Shutdown and periodic restart attempts |
| Galvanic Isolation | Yes, SELV/ES1 acc. to IEC 62368-1 |
| Protection Class | IP20 |
| Enclosure (W x H x D) | 70 x 135 x 155 mm |
| Mounting | DIN rail EN 60715 35x7.5/15 |
| Ambient Temperature (operation) | -30 ... +70 °C |
| Net Weight | 1.5 kg |
Certifications & Standards
- CE
- UKCA
- EAC
- RCM
- SEMI F47
- CB
- UL Hazloc
- UKEX
- CCC
- Shipbuilding
Selection Notes
This is the highest-current Ex-rated PSU6200 in the 24 V line, doubling the 6EP3334 Ex variant's 10 A rating to 20 A (24 A up to 45 degrees C) in a wider 70 mm enclosure while keeping the same ATEX/IECEx Zone 2 certification. Use it to consolidate a Zone 2 panel's 24 V loads onto one supply instead of paralleling two smaller Ex units, and drop to the 10 A Ex model when the panel load stays under roughly 12 A to save enclosure width.
Applications
Sized for larger 24 V DC control panels installed in Zone 2 hazardous areas that need more than 10-12 A of continuous DC load on a single certified supply.