Siemens 6EP3332-6SB00-0AY0 SITOP LOGO!Power 100-240V AC to 24V DC 2.5A Power Supply

The Siemens 6EP3332-6SB00-0AY0 SITOP LOGO!Power is a DIN-rail power supply converting 100-240 V AC input to a stabilized 24 V DC output at 2.5 A, delivering 60 W typical. Efficiency is 89.6% with a 40 ms buffering time on power loss and short-circuit-proof output limited to 3.2 A constant current.

Technical Specifications

Certifications & Standards

• CE
• EAC
• SEMI F47
• CB
• shipbuilding
• ABS
• BV
• DNV
• LRS

Selection Notes

This is the 2.5 A variant of the LOGO!Power family; at 60 W typical output it covers LOGO! logic modules and small sensor/actuator loops but has less headroom than the larger PSU200M-class units for higher continuous loads. The 150% overload capability (typ. 200 ms) at switch-on and in normal operation absorbs brief inrush from contactor coils without tripping, and the datasheet permits two units in parallel where 2.5 A alone is not enough. The 40 ms input buffering time at Vin = 187 V is worth checking against the load's ride-through requirement before specifying it on a supply prone to brief dips.

Applications

Sized for LOGO! logic controllers, small S7-1200 control panels, sensor/actuator 24 V DC loops, and DIN-rail field devices where total load stays under roughly 60 W on a single-phase feed.