- Home
- Power Quality, Metering & Power Supplies
- Siemens 6EP3324-7SB00-3AX0 SITOP PSU6200 12V/12A Power Supply Siemens 6EP3324-7SB00-3AX0 SITOP PSU6200 12V/12A Power Supply
Siemens 6EP3324-7SB00-3AX0 SITOP PSU6200 12V/12A Power Supply
Siemens 6EP3324-7SB00-3AX0 SITOP PSU6200 12V/12A Power Supply
Get Quote
- Description
The Siemens 6EP3324-7SB00-3AX0 is a SITOP PSU6200 power supply that converts a 120-240 V AC (or 110-240 V DC) input into a stabilized 12 V DC output rated 12 A continuous, 14.4 A up to 45 degrees C. It provides a diagnostic contact for DC O.K. status and reaches 89.3% efficiency at 144 W typical output power.
Technical Specifications
| SKU | 6EP3324-7SB00-3AX0 |
| Brand | Siemens |
| Series | SITOP PSU6200 |
| Product Designation | Power supply SITOP PSU6200 |
| Input Type | 1-phase AC or DC, wide range |
| Input Voltage | AC 120 ... 240 V / DC 110 ... 240 V |
| Line Frequency | 50/60 Hz |
| Output Voltage | 12 V DC, adjustable 12-15.5 V via potentiometer |
| Output Current, rated | 12 A (14.4 A up to +45 °C) |
| Supplied Power, typical | 144 W |
| Efficiency | 89.3 % |
| Power Loss, typical / no-load | 17 W / 3 W |
| Diagnostic Output | Electronic contact for DC O.K. / diagnostic interface |
| Overvoltage Protection | < 20 V |
| Short-Circuit Protection | Shutdown and periodic restart attempts |
| Overload Capability | 150 % rated current up to 5 s/min |
| Galvanic Isolation | Yes, SELV/ES1 acc. to IEC 62368-1 |
| Protection Class | IP20 |
| Enclosure (W x H x D) | 45 x 135 x 125 mm |
| Mounting | DIN rail EN 60715 35x7.5/15 |
| Ambient Temperature (operation) | -30 ... +70 °C |
| Net Weight | 0.9 kg |
Certifications & Standards
- CE
- UKCA
- EAC
- RCM
- SEMI F47
- CB
- Shipbuilding
- ABS
- DNV
- EPD
Selection Notes
At 12 A rated (14.4 A up to 45 degrees C) with 150% overload capability for up to 5 s/min, this PSU6200 variant covers loads that briefly exceed the 12 A steady rating, such as motor or valve inrush, without oversizing the supply. The built-in diagnostic contact reports a DC O.K. state for panel-level monitoring, and DIP-switchable output bridging supports parallel operation with a second unit for redundancy; choose the lower-current PSU6200 12 V models instead for loads that stay under a few amps.
Applications
Fits 12 V DC control and sensor loads with occasional inrush current, and panels that need a wired DC O.K. signal for PLC monitoring or a supervisory system.