- Home
- Power Quality, Metering & Power Supplies
- Siemens 6EP3311-6SB00-0AY0 LOGO!Power 5 V/6.3 A Stabilized Power Supply Siemens 6EP3311-6SB00-0AY0 LOGO!Power 5 V/6.3 A Stabilized Power Supply
Siemens 6EP3311-6SB00-0AY0 LOGO!Power 5 V/6.3 A Stabilized Power Supply
Siemens 6EP3311-6SB00-0AY0 LOGO!Power 5 V/6.3 A Stabilized Power Supply
Get Quote
- Description
The Siemens LOGO!Power 6EP3311-6SB00-0AY0 converts a 100-240 V AC or 110-300 V DC input into a stabilized, galvanically isolated 5 V DC output rated at 6.3 A. Efficiency is 79.8% at rated load, output voltage is adjustable from 4.6 to 5.4 V via an onboard potentiometer, and a soft-start avoids overshoot on power-up.
Technical Specifications
| SKU | 6EP3311-6SB00-0AY0 |
| Brand | Siemens |
| Series | LOGO!Power |
| Input Voltage (AC) | 100...240 V AC (85...264 V range), 50/60 Hz |
| Input Voltage (DC) | 110...300 V DC |
| Output Voltage | 5 V DC, adjustable 4.6...5.4 V |
| Output Current | 6.3 A rated, 0...6.3 A range |
| Supplied Active Power | 31.5 W typical |
| Efficiency | 79.8% |
| Residual Ripple | 100 mV maximum |
| Short-circuit Protection | Constant current characteristic, 8.2 A typical |
| Galvanic Isolation | Yes, SELV / ES1 (IEC 62368-1) |
| Protection Class | Class II, IP20 |
| Buffering Time (minimum) | 40 ms |
| Ambient Temperature (operation) | -25...+70 degrees C, natural convection |
| Enclosure (W x H x D) | 54 x 90 x 53 mm |
| Net Weight | 0.2 kg |
| MTBF (40 degrees C) | 2,654,280 h |
Certifications & Standards
- CE
- EAC
- SEMI F47
- CB
- Shipbuilding
- ABS
- BV
- DNV
- LRS
- EPD
Selection Notes
This is the 5 V/6.3 A member of the LOGO!Power range, sized for 5 V logic or sensor loads up to 31.5 W — choose the 12 V or 24 V LOGO!Power variants instead for standard 24 V field I/O. The wide 100-240 V AC or 110-300 V DC input lets it run unmodified across global mains voltages or a DC microgrid without a voltage selector switch, and two units can be paralleled for redundancy per its rated two parallel-switched equipment resources.
Applications
Powering 5 V logic circuits, sensors, or small electronic loads in machine control panels, LOGO! logic module accessory circuits, and retrofits needing a compact 5 V DIN-rail supply.