- Home
- Power Quality, Metering & Power Supplies
- Siemens 6EP3310-6SB00-0AY0 SITOP LOGO!Power 5V DC 3A Power Supply Siemens 6EP3310-6SB00-0AY0 SITOP LOGO!Power 5V DC 3A Power Supply
Siemens 6EP3310-6SB00-0AY0 SITOP LOGO!Power 5V DC 3A Power Supply
Siemens 6EP3310-6SB00-0AY0 SITOP LOGO!Power 5V DC 3A Power Supply
Get Quote
- Description
The Siemens 6EP3310-6SB00-0AY0 is a LOGO!Power stabilized DIN-rail power supply converting 100-240 V AC (85-264 V wide-range) input to a regulated 5 V DC output at up to 3 A. It delivers 76% efficiency, short-circuit-proof output, and a 40 ms power-failure buffering time, housed in a 36 x 90 x 53 mm enclosure.
Technical Specifications
| SKU / MLFB | 6EP3310-6SB00-0AY0 |
| Brand | Siemens |
| Series | SITOP LOGO!Power |
| EAN | 4025515154785 |
| Input voltage AC | 100-240 V, range 85-264 V, 47-63 Hz |
| Input voltage DC | 110-300 V |
| Input current | 0.36 A at 120 V / 0.22 A at 230 V |
| Inrush current limit, max | 26 A at 25 C |
| Output voltage | 5 V DC, adjustable 4.6-5.4 V via potentiometer |
| Output current | 3 A rated, range 0-3 A |
| Residual ripple, max | 100 mV |
| Efficiency | 76% |
| Power loss, typical | 4.7 W |
| Buffering time at power failure, min | 40 ms |
| Short-circuit protection | Yes, constant current characteristic |
| Protection class / IP | Class II, IP20 |
| Ambient temp, operation | -25 ... +70 C |
| Ambient temp, storage/transport | -40 ... +85 C |
| Dimensions (WxHxD) | 36 x 90 x 53 mm |
| Mounting | DIN rail EN 60715 35x7.5/15 |
| MTBF at 40 C | 2,931,709 h |
| Net weight | 0.12 kg |
Certifications & Standards
- CE
- UL
- EAC
- NEC Class 2
- SEMI F47
- CB
- Shipbuilding
- ABS
- BV
- DNV
- LRS
- EPD
Selection Notes
The 5 V / 3 A output size matches low-current logic and sensor loads, such as a LOGO! basic unit or 5 V-powered instrumentation, rather than the higher-current 24 V DC rail supplying contactors and larger I/O; pick a 24 V SITOP unit instead when the load is standard industrial 24 V equipment. The 40 ms power-failure buffering and short-circuit-proof output let it ride through brief dips without a dedicated UPS on small control panels.
Applications
Powers 5 V DC logic circuits, sensor rails, and small instrumentation on DIN-rail control panels, typically alongside a LOGO! or S7 controller drawing 24 V from a separate supply.