- Home
- Power Quality, Metering & Power Supplies
- Siemens 6EP1334-1LB00 SITOP PSU100L 24V/10A Stabilized Power Supply Siemens 6EP1334-1LB00 SITOP PSU100L 24V/10A Stabilized Power Supply
Siemens 6EP1334-1LB00 SITOP PSU100L 24V/10A Stabilized Power Supply
Siemens 6EP1334-1LB00 SITOP PSU100L 24V/10A Stabilized Power Supply
Get Quote
- Description
The Siemens 6EP1334-1LB00 is a SITOP PSU100L single-phase power supply that converts a switch-selectable 120 V or 230 V AC input into a stabilized 24 V DC output at up to 10 A. It delivers 240 W of active power at 89% efficiency, mounts on a 70 x 125 x 120 mm DIN-rail housing, and carries an MTBF of 2,333,396 hours at 40°C.
Technical Specifications
| SKU | 6EP1334-1LB00 |
| Brand | Siemens |
| Series | SITOP PSU100L |
| Product Designation | Power supply SITOP lite |
| Input Voltage | 120 V/230 V AC, selector switch |
| Input Voltage Range | 93 ... 264 V AC |
| Line Frequency | 50/60 Hz |
| Output Voltage | 24 V DC, adjustable 22.8-26.4 V |
| Output Current, rated | 10 A |
| Supplied Power, typical | 240 W |
| Efficiency | 89 % |
| Power Loss, typical | 34 W |
| Overvoltage Protection | < 33 V |
| Short-Circuit Protection | Constant current characteristic |
| Galvanic Isolation | Yes, SELV/ES1 acc. to IEC 62368-1 |
| Protection Class | IP20 |
| Enclosure (W x H x D) | 70 x 125 x 120 mm |
| Mounting | DIN rail EN 60715 35x7.5/15 |
| Ambient Temperature (operation) | 0 ... 60 °C |
| Net Weight | 0.75 kg |
| MTBF at 40 °C | 2,333,396 h |
Certifications & Standards
- CE
- UKCA
- EAC
- CB
- EPD
Selection Notes
The 10 A / 240 W rating sits at the top of the PSU100L 24 V line covered here, suited to cabinets with a heavier PLC-plus-I/O load than the lower-current variants can carry on one unit. Like the rest of the PSU100L line it supports parallel-switching two units for extra power headroom, and the output is field-adjustable between 22.8 V and 26.4 V via the on-device potentiometer — the same trimming procedure used across the PSU100L range regardless of current rating.
Applications
DIN-rail 24 V DC supply for cabinets with larger PLC/IO/HMI loads — multi-slot rack systems or larger machine control panels — running on 120/230 V single-phase AC mains where up to 240 W of continuous output is needed from one unit.