- Home
- Power Quality, Metering & Power Supplies
- Siemens 6EP1332-5BA20 SITOP PSU100C 120-230V AC 24V/3.7A NEC Class 2 Power Supply Siemens 6EP1332-5BA20 SITOP PSU100C 120-230V AC 24V/3.7A NEC Class 2 Power Supply
Siemens 6EP1332-5BA20 SITOP PSU100C 120-230V AC 24V/3.7A NEC Class 2 Power Supply
Siemens 6EP1332-5BA20 SITOP PSU100C 120-230V AC 24V/3.7A NEC Class 2 Power Supply
Get Quote
- Description
The Siemens 6EP1332-5BA20 is a SITOP PSU100C single-phase power supply that converts 100-230 V AC (or 110-300 V DC) into a restricted-output 24 V DC supply rated 3.7 A, NEC Class 2 per UL 1310. It mounts on a 52.5 mm-wide DIN rail, holds 3% overall voltage tolerance, and bridges a 20 ms mains dropout at rated load, suited to 24 V control circuits where NEC Class 2 wiring rules apply.
Technical Specifications
| Order Number | 6EP1332-5BA20 |
| Brand | Siemens |
| Series | SITOP PSU100C |
| Product Designation | PSU100C |
| Input Type | 1-phase AC or DC |
| Input Voltage AC | 100...230 V (85...264 V range) |
| Input Voltage DC | 110...300 V |
| Line Frequency | 50/60 Hz (47...63 Hz) |
| Output Voltage | 24 V DC, fixed (not adjustable) |
| Output Current | 3.7 A rated; 1.1 A at +70C (derating 3.5%/K above +50C) |
| Output Power | 89 W typical |
| Voltage Tolerance | 3% |
| Residual Ripple | 90 mV typical, 200 mV max |
| Efficiency | 87% |
| Power Loss | 14 W typical at rated load |
| Mains Buffering | 20 ms minimum at 230 V input |
| Current Limitation Response | 4 A typical, NEC Class 2 per UL 1310 |
| Short-Circuit Protection | Electronic shutdown, automatic restart |
| Overvoltage Protection Threshold | less than 60 V |
| Galvanic Isolation | Yes - SELV, ES1 (IEC 62368-1) |
| Protection Class | IP20 / Class I |
| Ambient Temperature (operation) | -20...+70C |
| Enclosure Dimensions (WxHxD) | 52.5 x 80 x 100 mm |
| Mounting | DIN rail EN 60715 35x7.5/15 |
| Net Weight | 0.32 kg |
| MTBF | 2,776,544 h at 40C |
| Country of Origin | RO |
Certifications & Standards
- CE
- EAC
- CB
- Shipbuilding
- ABS
- DNV
- EPD
Selection Notes
The 6EP1332-5BA20 delivers a fixed 24 V output at 3.7 A / 89 W, a step up in power from the 1.3 A model in the same PSU100C family, but without a potentiometer trim - the output voltage is not adjustable. The current-limiting response sits at roughly 4 A, which keeps the circuit inside the UL 1310 Class 2 fault-current limit and lets the 24 V wiring skip the branch-circuit protection that a non-Class-2 run would otherwise require in North American installations. Above +50C the output derates at 3.5%/K, reaching 1.1 A by +70C, a steeper rolloff than the smaller unit's 0.8%/K, so this rating needs more thermal margin in a warm panel.