- Home
- Power Contactors (AC-3)
- Schneider Electric LC1DT80AEHE TeSys Deca Advanced Contactor 4P 4NO AC-1 80 A 48-130 V AC/DC Coil Contactor Schneider Electric LC1DT80AEHE TeSys Deca Advanced Contactor 4P 4NO AC-1 80 A 48-130 V AC/DC Coil Contactor
Schneider Electric LC1DT80AEHE TeSys Deca Advanced Contactor 4P 4NO AC-1 80 A 48-130 V AC/DC Coil Contactor
Schneider Electric LC1DT80AEHE TeSys Deca Advanced Contactor 4P 4NO AC-1 80 A 48-130 V AC/DC Coil Contactor
Get Quote
- Description
The Schneider Electric LC1DT80AEHE is a TeSys Deca Advanced 4-pole (4NO) contactor rated 80 A AC-1 for resistive and non-inductive loads at up to 440 V. A sealed 48-130 V AC/DC electronic coil runs from AC or DC control sources, and EverLink BTR screw connectors on the power circuit keep terminations tight on vibration-prone switching loads such as heater banks.
Technical Specifications
| Reference | LC1DT80AEHE |
| Brand | Schneider Electric |
| Range | TeSys Deca Advanced |
| GTIN | 3606489493486 |
| Product Type | Contactor |
| Poles | 4P (4NO) |
| Utilisation Category | AC-1 |
| Rated Operational Voltage (Ue) | ≤ 690 V AC, 25-400 Hz |
| Rated Operational Current (Ie), AC-1, ≤440V | 80 A |
| Conventional Free-Air Thermal Current (Ith) | 80 A at 60 degrees C |
| Control Circuit Voltage (Uc) | 48-130 V AC/DC, electronic |
| Hold-In Power Consumption | 0.9 W |
| Rated Breaking Capacity at 440 V | 1000 A, IEC 60947 |
| Rated Short-Time Withstand Current (Icw), 1 s | 900 A at 40 degrees C |
| Rated Insulation Voltage (Ui) | 690 V, IEC 60947-4-1 |
| Auxiliary Contact Composition | 1 NO + 1 NC, mirror contact |
| Terminal Type | EverLink BTR screw connectors (power), screw clamp (control) |
| Maximum Operating Rate | 3600 cyc/h at 60 degrees C |
| Mounting | DIN rail or screw-fixing plate |
| IP Degree of Protection | IP20, front face |
| Dimensions (H x W x D) | 122 x 70 x 120 mm |
| Net Weight | 1290 g |
Certifications & Standards
- IEC 60947-4-1
- UL
- CSA
- CCC
- UKCA
Selection Notes
Four normally open poles make the LC1DT80AEHE a fit for switching resistive banks such as electric heaters or lighting loads where all four poles see the same 80 A AC-1 rating rather than a motor-duty AC-3 figure. The 48-130 V AC/DC coil covers 110 V AC or 125 V DC control circuits on one reference, and the 70 mm frame is wider than the 3-pole LC1D family to house the fourth pole.