- Home
- Power Contactors (AC-3)
- Schneider Electric LC1D80AKUE TeSys Deca Advanced Contactor 3P 3NO AC-3 66 A 100-250 V AC/DC Coil Contactor Schneider Electric LC1D80AKUE TeSys Deca Advanced Contactor 3P 3NO AC-3 66 A 100-250 V AC/DC Coil Contactor
Schneider Electric LC1D80AKUE TeSys Deca Advanced Contactor 3P 3NO AC-3 66 A 100-250 V AC/DC Coil Contactor
Schneider Electric LC1D80AKUE TeSys Deca Advanced Contactor 3P 3NO AC-3 66 A 100-250 V AC/DC Coil Contactor
Get Quote
- Description
The Schneider Electric LC1D80AKUE is a TeSys Deca Advanced 3-pole (3NO) contactor rated 66 A AC-3 at up to 440 V, built for 37 kW motors at 400 V. Its sealed 100-250 V AC/DC electronic coil runs from AC or DC control sources on one reference, and the power circuit terminates on ring-lug screw terminals instead of the EverLink connectors used on lower-current siblings.
Technical Specifications
| Reference | LC1D80AKUE |
| Brand | Schneider Electric |
| Range | TeSys Deca Advanced |
| GTIN | 3606481312341 |
| Product Type | Contactor |
| Poles | 3P (3NO) |
| Utilisation Category | AC-1, AC-3, AC-3e |
| Rated Operational Voltage (Ue) | ≤ 690 V AC, 25-400 Hz |
| Rated Operational Current (Ie), AC-3, ≤440V | 66 A |
| Rated Operational Current (Ie), AC-1, ≤440V | 80 A |
| Motor Power, AC-3 at 400 V | 37 kW |
| Control Circuit Voltage (Uc) | 100-250 V AC/DC, electronic |
| Hold-In Power Consumption | 1.2 W |
| Rated Breaking Capacity at 440 V | 1000 A, IEC 60947 |
| Rated Short-Time Withstand Current (Icw), 1 s | 900 A at 40 degrees C |
| Rated Insulation Voltage (Ui) | 690 V, IEC 60947-4-1 |
| Auxiliary Contact Composition | 1 NO + 1 NC, mirror contact |
| Terminal Type | Ring-lug screw terminals (power), screw clamp (control) |
| Maximum Operating Rate | 3600 cyc/h at 60 degrees C |
| Mounting | DIN rail or screw-fixing plate |
| IP Degree of Protection | IP20, front face |
| Dimensions (H x W x D) | 122 x 55 x 120 mm |
| Net Weight | 1002 g |
Certifications & Standards
- IEC 60947-4-1
- UL
- CSA
- CCC
- UKCA
Selection Notes
The catalogue number references the 80 A AC-1 resistive rating, but the continuous AC-3 motor duty is 66 A, which is the figure to use when sizing a 37 kW motor branch at 400 V. The 100-250 V AC/DC coil covers 110 V, 230 V AC or common DC buses on one part. Ring-lug terminals replace the EverLink connectors of the lower-current KUE siblings, so plan for crimped lugs rather than bare conductor at installation.