- Home
- I/O Modules & Remote I/O
- Siemens 6ES7152-1AA00-0AB0 SIMATIC ET 200iSP IM152-1 DP PROFIBUS Interface Module Siemens 6ES7152-1AA00-0AB0 SIMATIC ET 200iSP IM152-1 DP PROFIBUS Interface Module
Siemens 6ES7152-1AA00-0AB0 SIMATIC ET 200iSP IM152-1 DP PROFIBUS Interface Module
Siemens 6ES7152-1AA00-0AB0 SIMATIC ET 200iSP IM152-1 DP PROFIBUS Interface Module
Get Quote
- Description
The Siemens 6ES7152-1AA00-0AB0 IM152-1 DP is the PROFIBUS DP interface module for the SIMATIC ET 200iSP intrinsically-safe I/O station, connecting it to the fieldbus at up to 1.5 Mbit/s with redundant-operation support. Rated Ex ib IIC T4 Gb and Ex ib I Mb, it is built for Zone 1 gas and underground mining hazardous areas where the station itself sits inside the explosion zone.
Technical Specifications
| SKU | 6ES7152-1AA00-0AB0 |
| Brand | Siemens |
| Series | SIMATIC ET 200iSP |
| Product type designation | IM 152-1 |
| Mounting | Front mounting, rail mounting, wall/direct mounting |
| Supply voltage type | DC, 20.4-28.8 V permissible range |
| Input current from load voltage, power bus, max. | 30 mA |
| Power loss, typ. | 0.5 W |
| Time stamp accuracy | 20 ms |
| Number of stampable digital inputs, max. | 64, at 20 ms accuracy |
| Time stamp resolution | 1 ms |
| Interface/bus type | RS 485 |
| Transmission rate, max. | 1.5 Mbit/s, also 9.6/19.2/45.45/93.75/187.5/500 kbit/s |
| PROFIBUS DP | Yes |
| SYNC/FREEZE capability | Yes |
| Direct data exchange, slave-to-slave | Yes |
| Uo, no-load voltage, max. | 3.9 V |
| Io, short-circuit current, max. | 136 mA |
| Po, power output, max. | 132 mW |
| Ui, intrinsically safe input voltage, max. | 4.2 V |
| IP degree of protection | IP30 |
| CE mark | CE 0344 |
| UKCA mark | DEKRA 21UKEX0029 |
| cULus | LISTED E334384 |
| FM approval | CLASSIFIED 3025852 |
| INMETRO certificate | UL-BR 12.0067 |
| ATEX marking | II 2 G Ex ib IIC T4 Gb I M2 Ex ib I Mb |
| ATEX certificate | KEMA 04 ATEX 1243 |
| IECEx | IECEx KEM 05.0005 |
| CCC Ex | 2020322316002940 |
| EAC Ex | 1Ex ib IIC T4 Gb PB Ex ib I Mb |
| Width | 30 mm |
| Height | 129 mm |
| Depth | 136.5 mm |
| Weight, approx. | 245 g |
Certifications & Standards
- GL
- ABS
- BV
- DNV
Selection Notes
The IM152-1 DP is the interface module for the ET 200iSP zone-1/zone-2 intrinsically-safe I/O station; it does not carry I/O itself, so specify it once per ET 200iSP rack alongside the actual I/O modules, not per channel. Ex ib IIC T4 Gb for gas and Ex ib I Mb for mining mean the module itself can sit inside the hazardous zone, not just drive intrinsically-safe field wiring from outside it. Redundant operation and slave-to-slave direct data exchange let it participate in a PROFIBUS DP redundant-master configuration for continuous-process applications where a bus fault cannot stop the loop.