- Home
- I/O Modules & Remote I/O
- Siemens 6ES7132-7RD22-0AB0 SIMATIC ET 200iSP 4DQ 17.4VDC/40mA H-Shutdown Ex ib Remote I/O Module Siemens 6ES7132-7RD22-0AB0 SIMATIC ET 200iSP 4DQ 17.4VDC/40mA H-Shutdown Ex ib Remote I/O Module
Siemens 6ES7132-7RD22-0AB0 SIMATIC ET 200iSP 4DQ 17.4VDC/40mA H-Shutdown Ex ib Remote I/O Module
Siemens 6ES7132-7RD22-0AB0 SIMATIC ET 200iSP 4DQ 17.4VDC/40mA H-Shutdown Ex ib Remote I/O Module
Get Quote
- Description
The Siemens 6ES7132-7RD22-0AB0 is a SIMATIC ET 200iSP electronic module with 4 intrinsically safe digital outputs rated 17.4 V DC at 40 mA, built for Ex ib (ia Ga) IIC T4 Gb gas zones and Ex ib [ia IIIC Da] IIC T4 Gb dust zones with an H-shutdown input circuit. It mounts on the ET200iSP rail with screw or spring terminals and IP30 protection.
Technical Specifications
| Catalog No | 6ES7132-7RD22-0AB0 |
| SKU | 6ES7132-7RD22-0AB0 |
| Brand | Siemens |
| Series | SIMATIC ET 200iSP |
| Product type designation | 4DQ 17.4 V DC/40 mA |
| HW functional status | 2 |
| Firmware version | V3.0.0 |
| Product version | SHUT DOWN H |
| Digital outputs | 4, transistor, plus 1 intrinsically safe input for H shutdown |
| No-load voltage Uao (DC) | 17.4 V |
| Internal resistor Ri | 167 ohm |
| Output current, signal 1, rated | 0.04 A |
| Short-circuit protection | Yes |
| Parallel switching for uprating | Yes |
| Switching frequency, resistive load, max. | 100 Hz |
| Switching frequency, inductive load, max. | 2 Hz |
| Output delay 0 to 1 / 1 to 0, max. | 2 ms / 1.5 ms |
| Uo / Io / Po (gas group IIC), max. | 19.4 V / 118 mA / 0.57 W |
| Co / Lo (gas group IIC), max. | 0.24 uF / 2.5 mH |
| Ui / Pi / Ci (input circuit), max. | 28 V / 1.2 W / 3 nF |
| ATEX marking | II 2 G (1) G Ex ib [ia Ga] IIC T4 Gb, II 2 G (1) D Ex ib [ia IIIC Da] IIC T4 Gb, I M2 Ex ib [ia] I Mb |
| Degree of protection | IP30 |
| Current consumption, typ. / max. | 380 mA / 400 mA |
| Power loss, typ. | 2.8 W |
| Cable length, shielded / unshielded, max. | 500 m / 500 m |
| Connection method | Screw/spring-type terminal |
| Dimensions (W x H x D) | 30 x 129 x 136.5 mm |
| Weight, approx. | 255 g |
Certifications & Standards
- GL
- ABS
- BV
- DNV
Selection Notes
This is the highest-current member of the 17.4 V H-shutdown pair at 40 mA rated output, matching the L-shutdown 40 mA module electrically but built with the H-shutdown input circuit instead. Use its 19.4 V / 118 mA / 0.57 W Uo/Io/Po figures, not a sibling's, for the loop and barrier calculation, since they differ slightly from the 27 mA variant's values. Pick this over the 27 mA module when the field device draws more current at the same loop voltage.