- Home
- PLC CPUs, Safety PLCs & Logic Modules
- Siemens 6ES7517-3TQ10-0AB0 SIMATIC S7-1500T CPU 1517T-3 PN 6MB/50MB Technology Programmable Logic Controller Siemens 6ES7517-3TQ10-0AB0 SIMATIC S7-1500T CPU 1517T-3 PN 6MB/50MB Technology Programmable Logic Controller
Siemens 6ES7517-3TQ10-0AB0 SIMATIC S7-1500T CPU 1517T-3 PN 6MB/50MB Technology Programmable Logic Controller
Siemens 6ES7517-3TQ10-0AB0 SIMATIC S7-1500T CPU 1517T-3 PN 6MB/50MB Technology Programmable Logic Controller
Get Quote
- Description
Siemens designed the 6ES7517-3TQ10-0AB0 CPU 1517T-3 PN as a rack-mounted technology CPU in the SIMATIC S7-1500T motion-control line, sized for machines with axis and kinematics control needs. It runs 6 MB of program memory and 50 MB of data memory, and carries three PROFINET interfaces — two with integrated 2-port IRT switches for isochronous axis traffic and a third port reserved for PROFINET basic services.
Technical Specifications
| SKU | 6ES7517-3TQ10-0AB0 |
| Brand | Siemens |
| Series | SIMATIC S7-1500T |
| Product type designation | CPU 1517T-3 PN |
| Firmware version | V4.1 |
| Display | 6.1 cm diagonal, 8 keys |
| Work memory, program | 6 Mbyte |
| Work memory, data | 50 Mbyte |
| Load memory, max. (SIMATIC Memory Card) | 32 Gbyte |
| SIMATIC memory card required | Yes (not included) |
| Supply voltage, rated (DC) | 24 V |
| Supply voltage, permissible range (DC) | 19.2 to 28.8 V |
| Current consumption, rated | 1.07 A |
| Current consumption, max. | 1.5 A |
| Power loss, typ. | 13.6 W |
| CPU processing time, bit operations, typ. | 0.6 ns |
| Number of PROFINET interfaces | 3 |
| Interface ports | 2 (RJ45, X1), integrated switch |
| Number of IO Controllers, integrated | 2 |
| Number of connectable IO devices, max. | 512 |
| Isochronous mode | Yes, distributed and central, min. OB 6x cycle 250 µs |
| Retentive data area, max. | 2.25 Mbyte |
| Rack, modules per rack, max. | 32 (CPU + 31 modules) |
| Net weight | 1.671 kg |
Selection Notes
T marks this as a technology CPU built for motion control: it executes axis, cam and kinematics technology objects that a standard PN/DP CPU cannot run natively. Against the 1518T-3 PN at the top of the line, this CPU's 6 MB program memory and 50 MB data memory size it for machines with a moderate axis count; move up to the higher-memory 1518T once the project's axis count or data volume outgrows this budget. Choose the F variant of the S7-1500 family instead if the need is safety logic rather than motion technology, since the T-CPU carries no F-block support.