- Home
- Motor Control & Protection
- Schneider Electric CAE22M5 Easy TeSys Control Relay 2 NO 2 NC 220 V AC Coil Auxiliary Contactor Schneider Electric CAE22M5 Easy TeSys Control Relay 2 NO 2 NC 220 V AC Coil Auxiliary Contactor
Schneider Electric CAE22M5 Easy TeSys Control Relay 2 NO 2 NC 220 V AC Coil Auxiliary Contactor
Schneider Electric CAE22M5 Easy TeSys Control Relay 2 NO 2 NC 220 V AC Coil Auxiliary Contactor
Get Quote
- Description
The Schneider Electric CAE22M5 is an Easy TeSys control relay with a 2 NO + 2 NC contact composition, rated 10 A Ith at up to 690 V AC, and a 220 V AC 50 Hz control circuit. It provides four instantaneous auxiliary contacts for AC-15/AC-14 switching duty and wires in through screw clamp terminals on a 45 mm wide DIN-rail body.
Technical Specifications
| Reference | CAE22M5 |
| Brand | Schneider Electric |
| Range | Easy TeSys Control Relay |
| Product Type | Control relay |
| Pole Contact Composition | 2 NO + 2 NC |
| Utilisation Category | AC-14, AC-15 |
| [Ue] Rated Operational Voltage | ≤ 690 V AC |
| [Uc] Control Circuit Voltage | 220 V AC 50 Hz |
| [Ith] Conventional Free Air Thermal Current | 10 A (at 40 °C) |
| Rated Making Capacity (Irms) | 140 A at 690 V AC |
| [Icw] Rated Short-Time Withstand Current | 120 A (500 ms) / 140 A (100 ms) |
| [Ui] Rated Insulation Voltage | 690 V |
| [Uimp] Rated Impulse Withstand Voltage | 6 kV |
| Maximum Operating Rate | 180 cyc/min |
| Connections - Terminals | Screw clamp terminal, 1...2.5 mm² |
| Mounting Support | 35 mm DIN rail or plate (screw) |
| IP Degree of Protection | IP2X |
| Ambient Air Temperature for Operation | -20...70 °C |
| Dimensions (H x W x D) | 74 x 45 x 80 mm |
| Net Weight | 0.28 kg |
| Units per Package | 36 |
Certifications & Standards
- CE
- CCC
- EAC
- EN/IEC 60947-5-1
Selection Notes
Choose the CAE22M5 where the application needs 2 NO + 2 NC instantaneous switching at budget Easy TeSys cost rather than the full TeSys Deca CAD range — the contact mix is fixed, so pick the sibling variant whose NO/NC split matches the interlock or signalling circuit without adding a separate auxiliary contact block. The 220 V AC 50 Hz coil draws 70 VA inrush and 8 VA holding at 50 Hz, which the control transformer sizing should account for. Like the rest of the Easy TeSys range it carries a 180 cyc/min maximum operating rate, lower than the TeSys Deca CAD line, so reserve it for standard-duty rather than high-cycling applications.