- Home
- Industrial Networking
- Siemens 6GK1500-0FC10 SIMATIC NET PROFIBUS FC RS 485 Plug 180 12Mbit/s Industrial Network Connector Siemens 6GK1500-0FC10 SIMATIC NET PROFIBUS FC RS 485 Plug 180 12Mbit/s Industrial Network Connector
Siemens 6GK1500-0FC10 SIMATIC NET PROFIBUS FC RS 485 Plug 180 12Mbit/s Industrial Network Connector
Siemens 6GK1500-0FC10 SIMATIC NET PROFIBUS FC RS 485 Plug 180 12Mbit/s Industrial Network Connector
Get Quote
- Description
The Siemens 6GK1500-0FC10 is a PROFIBUS FC RS 485 bus connector with a 180-degree FastConnect cable outlet, rated for PROFIBUS transfer rates from 9.6 kbit/s up to 12 Mbit/s. It provides 2 insulation-displacement terminals for PB FC installation cable plus a 9-pin Sub-D connector to the node, with an integrated slide-switch terminating resistor that isolates the outgoing bus when engaged.
Technical Specifications
| SKU | 6GK1500-0FC10 |
| Brand | Siemens |
| Series | SIMATIC NET |
| EAN | 4025515076230 |
| Product type designation | PROFIBUS FC bus connector RS 485 |
| Transfer rate | 9.6 kbit/s to 12 Mbit/s |
| PROFIBUS cable connections | 2, integrated insulation-displacement terminals (FastConnect) |
| Node connection | 9-pin Sub-D connector |
| Terminating resistor | Integrated, slide-switch selectable, isolates outgoing bus when engaged |
| Cable outlet | 180 degrees |
| Enclosure material | Plastic |
| Degree of protection | IP20 |
| Dimensions (W x H x D) | 16 x 62 x 34.5 mm |
| Net weight | 40 g |
| Ambient temperature, operation | -40 to +70 degC |
Certifications & Standards
- RoHS
- UL
- cULus
Selection Notes
The integrated slide-switch terminating resistor means this connector doubles as a bus-end terminator without a separate part - engage it only on the two physical ends of a PROFIBUS segment, since a mid-segment termination corrupts the bus. The 180-degree cable outlet suits panels where the drop cable must run parallel to the device housing rather than straight out the back; a 90-degree variant exists for tighter enclosures.
Applications
Terminating or extending PROFIBUS DP segments on PLCs, drives, HMIs, or OLM repeaters at any of the standard 9.6 kbit/s to 12 Mbit/s transfer rates.