- Home
- DIN Rail Power Supplies (24V DC)
- Siemens 6EP3447-7SB00-3AX0 SITOP PSU6200 48V/20A 3AC Stabilized Power Supply Siemens 6EP3447-7SB00-3AX0 SITOP PSU6200 48V/20A 3AC Stabilized Power Supply
Siemens 6EP3447-7SB00-3AX0 SITOP PSU6200 48V/20A 3AC Stabilized Power Supply
Siemens 6EP3447-7SB00-3AX0 SITOP PSU6200 48V/20A 3AC Stabilized Power Supply
Get Quote
- Description
The Siemens 6EP3447-7SB00-3AX0 is a SITOP PSU6200 stabilized power supply that converts 3-phase 400-500 V AC input into a controlled, isolated 48 V DC output rated at 20 A. It delivers 960 W and reaches 96.6% efficiency, with a minimum 18 ms mains buffering time at 400 V input and a diagnostic interface for status monitoring.
Technical Specifications
| SKU | 6EP3447-7SB00-3AX0 |
| Brand | Siemens |
| Series | SITOP PSU6200 |
| Input Voltage | 400 - 500 V AC, 3-phase |
| Input Frequency | 50/60 Hz |
| Output Voltage | 48 V DC, adjustable 48 - 56 V via potentiometer |
| Output Current | 20 A rated, 24 A up to +45 degrees C |
| Rated Power | 960 W (1152 W up to 45 degrees C) |
| Efficiency | 96.6% |
| Mains Buffering Time | 18 ms minimum at Vin 400 V |
| Voltage Tolerance | 3% |
| Residual Ripple | 100 mV max, 80 mV typical |
| Overload Capability | 150% Iout rated up to 5 s/min |
| Protection | Short-circuit proof, shutdown with periodic restart |
| Galvanic Isolation | Yes, SELV/ES1 (IEC 62368-1) |
| Protection Class IP | IP20 |
| Ambient Temperature (Operation) | -30 to +70 degrees C |
| Connection | Push-in terminals |
| Dimensions (W x H x D) | 95 x 135 x 155 mm |
| Mounting | DIN rail EN 60715 35x7.5/15 |
| Net Weight | 2.1 kg |
Certifications & Standards
- CE
- UKCA
- EAC
- RCM
- SEMI F47
- CB
- ABS
- DNV
- EPD
Selection Notes
The 3-phase 400-500 V AC input suits installations already running 3-phase feeders, avoiding a separate single-phase drop for the control cabinet supply. The 18 ms buffering time at 400 V and the 150% overload capability for up to 5 s/min let this unit ride through short mains dips without tripping downstream 24 V or 48 V loads. Two units can be paralleled via DIP switch for increased power or redundancy, and the output voltage is field-adjustable from 48 to 56 V through the potentiometer to match specific load requirements.