- Home
- DIN Rail Power Supplies (24V DC)
- Siemens 6EP3446-7SB00-3AX0 SITOP PSU6200 3AC 48V/10A DIN Rail Power Supply Siemens 6EP3446-7SB00-3AX0 SITOP PSU6200 3AC 48V/10A DIN Rail Power Supply
Siemens 6EP3446-7SB00-3AX0 SITOP PSU6200 3AC 48V/10A DIN Rail Power Supply
Siemens 6EP3446-7SB00-3AX0 SITOP PSU6200 3AC 48V/10A DIN Rail Power Supply
Get Quote
- Description
The Siemens 6EP3446-7SB00-3AX0 is a SITOP PSU6200 three-phase power supply that accepts 400-500 V AC (or 500-550 V DC) input and delivers a stabilized, adjustable 48 V DC output rated at 10 A (480 W, 576 W up to 45°C), with galvanic isolation and a diagnostic interface for DC-OK status.
Technical Specifications
| SKU | 6EP3446-7SB00-3AX0 |
| Brand | Siemens |
| Series | SITOP PSU6200 |
| EAN | 4025515155331 |
| Input Type | 3-phase AC or DC |
| Input Voltage AC | 400-500 V (323-576 V operating range) |
| Input Voltage DC | 500-550 V |
| Line Frequency | 50/60 Hz (47-63 Hz) |
| Output Voltage | 48 V DC, adjustable 48-56 V |
| Output Current | 10 A (12 A up to 45°C) |
| Output Power | 480 W (576 W up to 45°C) |
| Efficiency | 96.2% |
| Residual Ripple (max) | 40 mV |
| Overvoltage Protection | less than 60 V |
| Short-Circuit Protection | Shutdown with periodic restart attempts |
| Protection Class | IP20 |
| Ambient Temperature (Operating) | -30 to +70°C |
| Enclosure Dimensions (W x H x D) | 70 x 135 x 155 mm |
| Mounting | DIN rail EN 60715 35x7.5/15 |
| Net Weight | 1.5 kg |
Certifications & Standards
- CE
- cULus
- UKCA
- EAC
- RCM
- SEMI F47
- BIS
- CB
- Shipbuilding Approval
- ABS
- DNV
- EPD
Selection Notes
The 6EP3446-7SB00-3AX0 is the 10 A, 400-500 V 3AC-input member of the PSU6200 48 V family, the three-phase counterpart to the 1AC 6EP3346-7SB00-3AX0 at the same current and power rating. Choose this 3AC model where the panel already has a three-phase feed and the 1AC model's single-phase input would mean an extra transformer or tap; choose the 1AC model instead where only single-phase power is present. Within the 3AC PSU6200 line, step down to the 5 A variant for smaller 48 V loads under 240 W, or use the DIP-switch-selectable parallel mode with a second unit to extend the 480 W (576 W derated) ceiling for a larger 48 V DC bus. The redundancy module accessory applies here the same way it does across the PSU6200 family.