- Home
- Contactor Relays & Auxiliary Contactors
- Schneider Electric CA2KN31F7 TeSys K Control Relay 3NO 1NC 110 V AC Coil Screw Clamp Auxiliary Contactor Schneider Electric CA2KN31F7 TeSys K Control Relay 3NO 1NC 110 V AC Coil Screw Clamp Auxiliary Contactor
Schneider Electric CA2KN31F7 TeSys K Control Relay 3NO 1NC 110 V AC Coil Screw Clamp Auxiliary Contactor
Schneider Electric CA2KN31F7 TeSys K Control Relay 3NO 1NC 110 V AC Coil Screw Clamp Auxiliary Contactor
Get Quote
- Description
CA2KN31F7 is Schneider Electric's TeSys K control relay in a 3NO+1NC arrangement, built around a 110 V AC coil and rated 10 A Ith for operation up to 690 V. It is rated for AC-15/DC-13 duty, used to control and duplicate pilot signals in motor control and interlocking circuits, and connects via screw clamp terminals on DIN rail or a mounting plate.
Technical Specifications
| Reference | CA2KN31F7 |
| Brand | Schneider Electric |
| Range | TeSys K |
| Product Type | Control Relay |
| Pole Contact Composition | 3NO+1NC |
| Utilisation Category | AC-15 / DC-13 |
| Rated Operational Voltage (Ue) | ≤690 V (≤400 Hz) |
| Control Circuit Voltage (Uc) | 110 V AC (AC 50/60 Hz) |
| Conventional Thermal Current (Ith) | 10 A (at 50 °C) |
| Rated Making Capacity (Irms) | 110 A (IEC 60947) |
| Rated Insulation Voltage (Ui) | 690 V (IEC 60947) |
| Associated Fuse Rating | 10 A gG (IEC 60947 / VDE 0660) |
| Control Circuit Voltage Limits | drop-out 0.2–0.75 Uc, operational 0.8–1.15 Uc (≤50 °C) |
| Maximum Operating Rate | 10,000 cyc/h |
| Inrush / Hold-in Power | 30 VA / 4.5 VA (20 °C) |
| Mounting | 35 mm DIN rail or screw-fixed mounting plate |
| Connections | Screw clamp terminals, 1.5–4 mm² solid / 0.75–4 mm² flexible with cable end |
| Dimensions (H × W × D) | 58 × 45 × 57 mm (H × W × D) |
| Net Weight | 0.18 kg |
| IP Degree of Protection | IP2X |
| Ambient Temperature | -25…+50 °C operation, -50…+80 °C storage |
Certifications & Standards
- CE
- UKCA
- UL
- CSA
- CCC
- EAC
- IEC 60947-5-1
Selection Notes
Choose the 3NO+1NC version when the application needs three make contacts for parallel command signals alongside one break contact for interlocking or indication. The 110 V AC coil variant fits control circuits already wired at that voltage, so the contactor coil can be driven directly without an additional transformer tap. The AC coil pulls in within 10–20 ms and draws 30 VA at inrush, dropping to 4.5 VA hold-in, which is the standard figure to size a shared control transformer against when several of these relays switch together.