- Part number
- XA2EA7A3415
- Model no
- XA2
Description
About the XA2
About the XA2
The Schneider Electric XA2EA7A3415 is an Easy Harmony XA2 double-headed push button combining a green, flush head marked 'I' with a red, flush head marked 'O' in a single rectangular mounting. It uses spring-return operation on both heads, switches 1 NO + 1 NC contact through slow-break operation, and mounts in a 22.5 mm panel cutout sealed to IP40.
Certifications & Standards
- CCC
- EAC
- CE
- IEC 60947-5-1
- GB 14048.1
- GB 14048.5
Selection Notes
Combining a green 'I' (start) head and red 'O' (stop) head in one rectangular mounting cuts the panel space of two separate single-head buttons to one 22.5 mm cutout, and follows the IEC 60204-1 colour-and-marking convention for a start/stop pair. Spring return on both heads gives a momentary action, so the 1 NO + 1 NC contact only switches while each head is pressed, which suits direct motor jog or start/stop control rather than a latched state. Positive opening on the contact block (IEC 60947-5-1 Annex K) is limited to the NC side, matching the stop function's need for a guaranteed break even if contacts weld.
Specification
Full specification
Main 6
| Range of product | Harmony XA2 |
|---|---|
| Product or component type | Double-headed push-button |
| Device short name | XA2 |
| Bezel material | Plastic |
| Fixing collar material | Plastic |
| Device presentation | Complete product |
Complementary 27
| Mounting diameter | 22.5 mm |
|---|---|
| Shape of signaling unit head | Rectangular |
| Type of operator | spring return |
| Operator profile | Green flush, I (green), Red flush, O (red) |
| Contacts type and composition | 1 NO + 1 NC |
| Contact operation | Slow-break |
| Contacts usage | Standard contacts |
| Positive opening | With conforming to IEC 60947-5-1 appendix K |
| Operating travel | 1.75 mm (NC changing electrical state), 2.65 mm (NO changing electrical state), 4.8 mm (total travel) |
| Mechanical durability | 500000 cycles |
| Connections - terminals | Screw clamp terminals, <= 1 x 2.5 mm² without cable end conforming to IEC 60947-1, Screw clamp terminals, <= 2 x 1.5 mm² with cable end conforming to IEC 60947-1, Screw clamp terminals, >= 1 x 0.5 mm² without cable end conforming to IEC 60947-1 |
| Tightening torque | 0.8…1.2 N.m conforming to IEC 60947-1 |
| Shape of screw head | Cross |
| Contacts material | Silver alloy (Ag/Ni) |
| Short-circuit protection | 10 A gL fuse conforming to IEC 60269-1 |
| [Ith] conventional free air thermal current | 10 A conforming to IEC 60947-5-1 |
| [Ui] rated insulation voltage | 600 V (pollution degree 3) conforming to IEC 60947-1 |
| [Uimp] rated impulse withstand voltage | 6 kV conforming to IEC 60947-1 |
| [Ie] rated operational current | 3 A at 240 V, AC-15, A600 conforming to IEC 60947-5-1, 0.27 A at 250 V, DC-13, Q600 conforming to IEC 60947-5-1 |
| Electrical durability | 500000 cycles, AC-15, 3 A at 240 V, operating rate <3600 cyc/h, load factor: 0.5 conforming to IEC 60947-5-1 appendix C |
| Surge withstand | 1 kV conforming to IEC 61000-4-5 |
| Terminals description ISO n°1 | (13-14)NO, (11-12)NC |
| Width | 29.8 mm |
| Height | 54.6 mm |
| Depth | 43.3 mm |
| Net weight | 0.044 kg |
| Cap/operator or lens colour | Green + red |
Environment 9
| Ambient air temperature for storage | -40…85 °C |
|---|---|
| Ambient air temperature for operation | -25…55 °C |
| Overvoltage category | Class I conforming to IEC 536 |
| IP degree of protection | IP40 conforming to IEC 60529 |
| IK degree of protection | IK05 conforming to IEC 50102 |
| Standards | IEC 60947-5-1, GB 14048.1, GB 14048.5 |
| Product certifications | CCC, EAC, CE |
| Vibration resistance | 15 gn (f= 12…500 Hz) conforming to IEC 60068-2-6 |
| Shock resistance | 70 gn (duration = 11 ms) for half sine wave acceleration conforming to IEC 60068-2-27 |
Show all 72 specifications ↓ Show less ↑30 more values in Identification, Contractual warranty, Logistics.
Identification 7
| Part number | XA2EA7A3415 |
|---|---|
| Type designation | XA2 |
| Brand | Schneider Electric |
| Condition | New, factory sealed |
| Source | Schneider Electric and its authorised distributors |
| Warranty | Manufacturer warranty |
| Lifecycle status | Active, in production |
Contractual warranty 1
| Warranty (in months) | 18 |
|---|
Logistics 22
| Unit Type of Package 1 | PCE |
|---|---|
| Number of Units in Package 1 | 1 |
| Package 1 Height | 5.46 cm |
| Package 1 Width | 2.98 cm |
| Package 1 Length | 4.33 cm |
| Package 1 Weight | 44.8 g |
| Unit Type of Package 2 | S02 |
| Number of Units in Package 2 | 70 |
| Package 2 Height | 15 cm |
| Package 2 Width | 30 cm |
| Package 2 Length | 40 cm |
| Package 2 Weight | 6 kg |
| Unit Type of Package 3 | P06 |
| Number of Units in Package 3 | 1120 |
| Package 3 Height | 95 cm |
| Package 3 Width | 60 cm |
| Package 3 Length | 80 cm |
| Package 3 Weight | 97 kg |
| Shipping weight | 0.044 kg |
| Ships from | Türkiye |
| Dispatch | — |
| Stock | On request |
Source: manufacturer data · Last verified: 30 Oct 2026
Documents
Documents for XA2EA7A3415
No documents are on file for this part yet.
Ask us for the datasheet
Certifications
Certifications and standards
- CE
- CCC
- EAC
- IEC 60947-5-1
- GB 14048.1
- GB 14048.5
Quick answers
Questions about the XA2
What is the HS code of XA2 for customs?
The tariff (HS) code on file for XA2 is 853650.
Where does XA2 ship from, and how fast?
XA2 ships from Türkiye. Shipping calculated at checkout · import duties and taxes paid on arrival.
Reviews
Customer reviews
Series
Schneider Electric Harmony XA2
- Brand
- Schneider Electric
- Series
- Harmony XA2