- Part number
- RSL1PVJU
- UL
- CSA
Harmony Electromechanical RelaysSchneider Electric RSL1PVJU Harmony RSL 6A 1CO 12V AC/DC Slim Interface Relay
Harmony RSL slim pre-assembled interface relay with socket, 6A 1CO, 12V AC/DC coil, LED, IP40.
Description
About the RSL1PVJU
About the RSL1PVJU
The Schneider Electric RSL1PVJU is a Harmony RSL series slim interface relay pre-assembled with its socket, switching a single C/O contact rated 6 A from a 12 V AC/DC control coil. At just 6.2 mm wide, it is built to save DIN-rail space, and a status LED shows the relay state at a glance.
Certifications & Standards
- CE
- UL
- GOST
- CSA
- CSA C22.2 No 14
- UL 508
- IEC 61810-1
Selection Notes
The 12 V AC/DC coil on the RSL1PVJU accepts either supply without a separate DC-only or AC-only variant, which matters in cabinets driven from 12 V control transformers or low-voltage DC control buses rather than 110 V. Because it ships pre-assembled with its socket, there is no separate relay-plus-socket part number to specify, and the 6.2 mm width lets several sit side by side on a terminal strip. Operating range tops out at 55°C rather than the wider range some coil-voltage options in the RSL family support, so check ambient headroom in warm enclosures. At 6 A/250 V AC, size it for signal and small-contactor-coil switching, not motor-duty loads.
Specification
Full specification
Main 9
| Range of Product | Harmony Electromechanical Relays |
|---|---|
| Series name | RSL series |
| Product or Component Type | Pre-assembled plug-in relay with socket |
| Relay Type | Slim interface relay |
| Contact operation | Standard |
| Contacts type and composition | 1 C/O |
| Status LED | With |
| [Uc] control circuit voltage | 12 V AC/DC |
| [Ithe] conventional enclosed thermal current | 6 A -40…131 °F (-40…55 °C) |
Complementary 36
| Fixing Mode | Plastic compression spring |
|---|---|
| Average resistance | 848 Ohm DC 23 °C +/- 10 % |
| [Uimp] rated impulse withstand voltage | 6 kV IEC |
| [Ie] rated operational current | 6 A 1 C/O AC-1/DC-1)IEC/UL |
| minimum switching current | 100 mA |
| Minimum switching voltage | 12 V |
| [Ui] rated insulation voltage | 250 V IEC, 277 V cUL |
| Minimum switching capacity | 120 mW |
| Maximum switching voltage | 277 V |
| Drop-out voltage threshold | >= 0.05 Uc |
| Load current | 6 A 250 V AC 0.5 mm mounting distance |
| Electrical durability | 60000 cycles resistive, 6 A 250 V, AC-1 |
| Maximum switching capacity | 1500 VA, 150 W |
| Operating time | 5 ms reset, 12 ms |
| Terminals description ISO n°1 | (11-12-14)OC, (A1-A2)CO |
| Average coil consumption | 0.17 W, DC |
| Mechanical durability | 10000000 cycles |
| Safety reliability data | B10d = 60000 |
| Operating rate | <= 72000 cycles/hour no-load, <= 360 cycles/hour under load |
| Tightening torque | < 0.5 N.m M2.5 |
| Control Type | Without lockable test button |
| Compatibility code | RSL |
| Contact terminal arrangement | Separate |
| Connections - terminals | Screw connectors, 1 x 0.2...1 x 2.5 mm² 24 AWG...14 AWG) flexible with cable end, Screw connectors, 1 x 0.2...1 x 2.5 mm² 24 AWG...14 AWG) solid without cable end |
| Protection category | RT III |
| Mounting Support | 35 mm symmetrical DIN rail |
| Operating position | Any position |
| Test levels | Level A group mounting |
| Device presentation | Complete product |
| Sale per indivisible quantity | 10 |
| Contacts material | Silver alloy (AgSnO2) |
| Shape of pin | Flat (PCB type) |
| Width | 0.2 in (6.2 mm) |
| Height | 3.09 in (78.6 mm) |
| Depth | 3.7 in (95 mm) |
| Net Weight | 0.064 lb(US) (0.029 kg) |
Environment 10
| Input voltage | 12 V AC/DC 11.4...14.4 V) |
|---|---|
| Dielectric strength | 1000 V AC between contacts, 4000 V AC between coil and contact |
| IP degree of protection | IP40 conforming to IEC 60529 |
| Ambient air temperature for operation | -40…131 °F (-40…55 °C) |
| Standards | CSA C22.2 No 14, UL 508, IEC 61810-1 |
| Product Certifications | UL, GOST, CSA |
| Marking | CE |
| Ambient Air Temperature for Storage | -40…185 °F (-40…85 °C) |
| Vibration resistance | 10 gn +/- 1 mm 10…150 Hz)10 cycles not operating IEC 60068-2-6, 5 gn +/- 1 mm 10…150 Hz)10 cycles in operation IEC 60068-2-6 |
| Shock resistance | 10 gn 11 ms) in operation IEC 60068-2-27, 5 gn 11 ms) not operating IEC 60068-2-27 |
Show all 68 specifications ↓ Show less ↑13 more values in Identification, Contractual warranty, Logistics.
Identification 7
| Part number | RSL1PVJU |
|---|---|
| Brand | Schneider Electric |
| Condition | New, factory sealed |
| Source | Schneider Electric and its authorised distributors |
| Warranty | Manufacturer warranty |
| Lifecycle status | Active, in production |
| EAN | 3606480077821 |
Contractual warranty 1
| Warranty (in months) | 18 |
|---|
Logistics 5
| Country of origin | CN |
|---|---|
| Shipping weight | 0.029 kg |
| Ships from | Türkiye |
| Dispatch | — |
| Stock | On request |
Source: manufacturer data · Last verified: 30 Oct 2026
Documents
Documents for RSL1PVJU
No documents are on file for this part yet.
Ask us for the datasheet
Certifications
Certifications and standards
- UL
- CSA
- CSA C22.2 No 14
- UL 508
- IEC 61810-1
Quick answers
Questions about the RSL1PVJU
What is the rated current of RSL1PVJU?
The rated current of RSL1PVJU is 6 A.
Which supply voltage is RSL1PVJU rated for?
The rated operational voltage of RSL1PVJU is 12–DC V DC.
What is the HS code of RSL1PVJU for customs?
The tariff (HS) code on file for RSL1PVJU is 85364900.
What is the EAN of RSL1PVJU?
The EAN (GTIN) of RSL1PVJU is 3606480077821.
Where does RSL1PVJU ship from, and how fast?
RSL1PVJU ships from Türkiye. Shipping calculated at checkout · import duties and taxes paid on arrival.
Reviews
Customer reviews
Series
Schneider Electric Harmony Electromechanical Relays
- Brand
- Schneider Electric
- Series
- Harmony Electromechanical Relays
