Part number
NTSDDO0402HK
518.65 SR On request Dispatch — · From TürkiyeGet a Quote
Modicon Edge I/O NTS

Schneider Electric NTSDDO0402HK Modicon Edge I/O NTS Digital Output 4Ch 24VDC 500mA Hardened Remote I/O Module

Modicon Edge I/O NTS discrete output module + base, 4 channels, 24V DC, 500mA, source, hardened.

Range of Product
Modicon Edge I/O NTS
Product or Component Type
Discrete output module kit
Kit composition
NTSDDO0402H module, NTSXBA0100H base
Mandatory accessory
NTSXTB12_0_H terminal block
Product Compatibility
NTSN.....
Range Compatibility
Logic/motion controller - Modicon M262, Modicon M580, Third party
EAN
3606487024538
Description

About the NTSDDO0402HK

The Schneider Electric NTSDDO0402HK is a Modicon Edge I/O NTS discrete output module kit with 4 transistor outputs at 24 V DC, 500 mA per channel, pre-assembled on its NTSXBA0100H base for severe-environment use. Channels wire in 1, 2 or 3 wires with read-back and over-current diagnostics, covering an extended -40...70 degC range with conformal-coated electronics. It mounts on a DIN rail and connects to Modicon M262 or M580 controllers.

Certifications & Standards

  • CE
  • UKCA
  • cULus
  • RCM
  • EN/IEC 61131-2

Selection Notes

The 500 mA per-channel rating on the NTSDDO0402HK fits small loads such as indicator lamps, interposing relay coils or sensor enable lines; for higher-current actuators the 2 A-per-channel NTSDDO0802K is the correct pick instead. Read-back diagnostics report the actual output state back to the controller, catching a stuck or shorted output that a simple command-echo would miss. The hardened build's conformal coating and -40...70 degC range justify the step up from the standard NTSDDO0402K when the panel is exposed to vibration, condensation or wide ambient swings.

Specification

Full specification

64 values · Last verified 30 Oct 2026

Main 12

Range of Product Modicon Edge I/O NTS
Product or Component Type Discrete output module kit
Kit composition NTSDDO0402H module, NTSXBA0100H base
Mandatory accessory NTSXTB12_0_H terminal block
Product Compatibility NTSN.....
Range Compatibility Logic/motion controller - Modicon M262, Modicon M580, Third party
Device Application Industrial application in severe environment
Discrete output number 4
Group of output channels 1 group
Discrete output logic Positive logic (source)
Discrete output voltage 24 V DC
Operating Mode Synchronous/Isochronous

Complementary 25

Discrete output number 4 transistor
Output wiring mode 1, 2 or 3 wires
Discrete output current 500 mA per channel, 2 A per module
Discrete output frequency 1 kHz for resistive load, 0.5/LI² Hz for inductive load
Response time on output 90 µs maximum (turn on), 110 µs maximum (turn off)
Maximum leakage current 0.002 mA per channel
Maximum voltage drop <0.1 V per channel DC
Maximum tungsten load <12 W
Output protection type Transient voltage suppression per channel, Short circuit protection per channel, Overload/thermal protection per channel, Reverse polarity protection per module
Output diagnostic Power supply error per channel, Broken wire error per channel, Over current error per channel, Read back error per channel
Power supply type Bus power from power supply bus (24 Vdc), Field power from power supply field (24 Vdc)
Rated operational voltage limits 20.4...28.8 V DC
Typical current consumption 30 mA 24 V DC on the Bus current, 8.4 mA 24 V DC on the internal field current minimum, 2010.1 mA 24 V DC on the internal field current maximum
Electrical Connection Screw/spring terminal block
Power dissipation in W 1.27 W maximum at 24 V DC
Isolation between channels and bus 1500 V AC
Isolation between channels and ground 1500 V AC
Hot swapping fallback Yes
Local signalling 1 LED (green) for module operating (RUN), 1 LED per channel (green) for channel diagnostic, 1 LED (red) for module error (ERR)
Housing Colour Grey
Mounting support Top hat type TH35-7.5 rail IEC 60715, Top hat type TH35-15 rail IEC 60715
Height 4.6 in (116.6 mm)
Width 0.6 in (15 mm)
Depth 3.2 in (81 mm)
Net Weight 0.161 lb(US) (0.073 kg)

Environment 14

IP Degree of Protection IP20
Protective treatment Conformal coating
Marking CE, UKCA, CULus, RCM
Product certifications CE, UKCA, CULus, RCM, Merchant Navy - EU RO MR (pending), EAC (pending), ATEX Zone 2 (pending), IECEx zone 2 (pending), CCC Ex zone 2 (pending)
Standards EN/IEC 61131-2, EN 61010-2-201, UL 61010-2-201, IACS E10, EN/IEC 61000-6-5, interface type 1 and type 2, EN/IEC 61850-3, location G, EN/IEC 60079-0, EN 50155, EN 50121-4, EN 50121-5
Directives 2014/30/EU - electromagnetic compatibility, 2014/34/EU - ATEX directive, 2014/35/EU
Ambient air temperature for operation -40…158 °F (-40…70 °C)
Ambient air temperature for storage -40…185 °F (-40…85 °C)
Relative humidity 5…95 % without condensation
Operating altitude 0...6561.68 ft (0...2000 m) without derating, 2000...5000 m with derating
Pollution degree 2
Environmental characteristic Gas resistant C3 and G2
Vibration resistance 1 g without accessory, 2 g with accessory
Shock resistance 15 g 11 ms with and without accessory)
Show all 64 specifications ↓ Show less ↑13 more values in Identification, Contractual warranty, Logistics.

Identification 7

Part number NTSDDO0402HK
Brand Schneider Electric
Condition New, factory sealed
Source Schneider Electric and its authorised distributors
Warranty Manufacturer warranty
Lifecycle status Active, in production
EAN 3606487024538

Contractual warranty 1

Warranty (in months) 18

Logistics 5

Country of origin ID
Shipping weight 0.073 kg
Ships from Türkiye
Dispatch —
Stock On request

Source: manufacturer data · Last verified: 30 Oct 2026

Documents

Documents for NTSDDO0402HK

No documents are on file for this part yet.

Ask us for the datasheet
Certifications

Certifications and standards

  • CE
  • UKCA
  • CCC
  • EAC
  • EN/IEC 61131-2
  • EN 61010-2-201
  • UL 61010-2-201
  • IACS E10
  • EN/IEC 61850-3
  • location G
  • EN/IEC 60079-0
  • EN 50155
  • EN 50121-4
  • EN 50121-5
Quick answers

Questions about the NTSDDO0402HK

What is the HS code of NTSDDO0402HK for customs?

The tariff (HS) code on file for NTSDDO0402HK is 853710.

What is the EAN of NTSDDO0402HK?

The EAN (GTIN) of NTSDDO0402HK is 3606487024538.

Where does NTSDDO0402HK ship from, and how fast?

NTSDDO0402HK ships from Türkiye. Shipping calculated at checkout · import duties and taxes paid on arrival.

Guides

Guides for PLC & controllers

All guides for PLC & controllers
Reviews

Customer reviews

Series

Schneider Electric Modicon Edge I/O NTS

Brand
Schneider Electric
Series
Modicon Edge I/O NTS
518.65 SR On request
Get a Quote
Quote

Get a Quote

Genuine parts

Genuine, factory-sealed parts

Schneider Electric · NTSDDO0402HK

Every part on Stoklink is new, unused and made by the manufacturer named on the page.

Condition
New and unused, in the manufacturer's factory-sealed packaging.
Sourced from
Schneider Electric and its authorised distributors.
Warranty
The manufacturer's warranty applies.
If a part is not genuine
We refund the full amount.

Added to cart Could not add to cart

View cart