Part number
LV454444
917.16 SR On request Dispatch — · From TürkiyeGet a Quote

Schneider Electric LV454444 MasterPact MTZ External Power Supply 24 V DC Air Circuit Breaker Accessory

Schneider Electric LV454444 external power supply, 200-240 V AC in / 24 V DC 1 A out, for MasterPact MTZ MicroLogic units.

Rated operational voltage
200–240 V AC
EAN
00785901810926
Description

About the LV454444

The Schneider Electric LV454444 is a regulated switch-mode external power supply that converts 200-240 V AC into a stable 24 V DC output at 1 A, built to feed the MicroLogic control and trip units on MasterPact MTZ, NT, NW, ComPact NSX and PowerPact breakers whenever an independent 24 V DC source is needed for communication.

Certifications & Standards

  • CE
  • UL 61010-1
  • IEC 62477-1

Selection Notes

LV454444 is the single-output 1 A / 24 W version of this external power supply — size the DIN-rail branch around that 24 W ceiling when a MicroLogic unit also has to drive communication modules on the same circuit. The regulated 24 V DC output and -25...70 degC operating range suit switchboard enclosures where ambient heating from adjacent breakers is a factor. Choose this module only when the panel design already runs a 200-240 V AC feed to the compartment; the MicroLogic unit otherwise takes its power from the breaker itself.

Specification

Full specification

49 values · Last verified 30 Oct 2026

Main 4

Product or Component Type External power supply module
Device Application Power supply
Range compatibility Masterpact MasterPact MTZ, Masterpact MasterPact NT, Masterpact MasterPact NW, ComPact ComPact NSX, ComPact ComPact NSX DC, ComPact ComPact NS630b...1600, ComPact ComPact NS1600b...3200, PowerPact PowerPact H, PowerPact PowerPact J, PowerPact PowerPact L, PowerPact PowerPact P, PowerPact PowerPact R
Accessory / Separate Part Type Control units accessories, Trip unit accessories

Complementary 23

Trip unit name MicroLogic
Power supply type Regulated switch mode
[Us] rated supply voltage 200...240 V AC 50/60 Hz +10 % -15 %
Input voltage limits 170...264 V AC 47.5…63 Hz
Output Voltage 24 V DC +/-5 %
Overvoltage category IV conforming to IEC 62477-1, III conforming to UL 61010-1
Power supply output current 1 A
Rated power in W 24 W
Output protection type Against overload, protection technology: manual reset, Against overvoltage, protection technology: 30...32 V, manual reset, Against short-circuits, protection technology: manual reset, Thermal, protection technology: automatic reset
Inrush current 20 A 2 ms
Efficiency 85 %
Power dissipation in W 4.2 W
Holding time >= 20 ms 200...240 V AC
Permissible temporary current boost 1.5 A 200 ms)
Connections - terminals Screw type terminals, connection capacity: 2 x 0.2...2 x 1.5 mm² 24 AWG...16 AWG, Screw type terminals, connection capacity: 1 x 0.2...1 x 4 mm² 24 AWG...12 AWG
Mounting Support 35 x 7.5 mm symmetrical DIN rail
Operating position Horizontal
Operating altitude 0...6561.68 ft (0...2000 m)
Name of test Electrostatic discharges conforming to EN/IEC 61000-4-2, Induced electromagnetic field conforming to EN/IEC 61000-4-6, Magnetic field conforming to EN 61000-4-8, Primary outage conforming to IEC 61000-4-11, Radiated electromagnetic field conforming to EN/IEC 61000-4-3, Rapid transient conforming to IEC 61000-4-4, Surge conforming to EN/IEC 61000-4-5, Radiated emissions conforming to EN 61000-6-3, Conducted emissions on the power line conforming to EN 61000-6-3
Status LED 1 LED (Green) output voltage
Height 3.5 in (90 mm)
Width 4.3 in (108 mm)
Depth 2.7 in (67.5 mm)

Environment 9

Standards UL 61010-1, IEC 62477-1
Marking EAC, CE, UL
Environmental characteristic EMC conforming to EN/IEC 61000-6-2, EMC conforming to EN/IEC 61000-6-3, Safety conforming to IEC 62477-1, Safety conforming to SELV
IP degree of protection IP4X EN/IEC 60529 front face), IP2X EN/IEC 60529 connection terminals), IP3x EN/IEC 60529 housing)
Ambient air temperature for operation -13…158 °F (-25…70 °C)
Ambient Air Temperature for Storage -58…185 °F (-50…85 °C)
Relative Humidity 0…95 % during operation, 0…95 % in storage
Dielectric strength 3000 V between input and ground, 3000 V between input and output, 1500 V between output and ground
Compatibility code CB_EXTERNAL_POWERSUPPLY
Show all 49 specifications ↓ Show less ↑13 more values in Identification, Contractual warranty, Logistics.

Identification 7

Part number LV454444
Brand Schneider Electric
Condition New, factory sealed
Source Schneider Electric and its authorised distributors
Warranty Manufacturer warranty
Lifecycle status Active, in production
EAN 00785901810926

Contractual warranty 1

Warranty (in months) 18

Logistics 5

Country of origin CN
Shipping weight 0.369 kg
Ships from Türkiye
Dispatch —
Stock On request

Source: manufacturer data · Last verified: 30 Oct 2026

Documents

Documents for LV454444

No documents are on file for this part yet.

Ask us for the datasheet
Certifications

Certifications and standards

  • UL 61010-1
  • IEC 62477-1
Quick answers

Questions about the LV454444

Which supply voltage is LV454444 rated for?

The rated operational voltage of LV454444 is 200–240 V AC.

What is the HS code of LV454444 for customs?

The tariff (HS) code on file for LV454444 is 853890.

What is the EAN of LV454444?

The EAN (GTIN) of LV454444 is 00785901810926.

Where does LV454444 ship from, and how fast?

LV454444 ships from Türkiye. Shipping calculated at checkout · import duties and taxes paid on arrival.

Guides

Guides for ACB

All guides for ACB
Reviews

Customer reviews

Series

Other series in Air Circuit Breakers (ACB)

917.16 SR On request
Get a Quote
Quote

Get a Quote

Genuine parts

Genuine, factory-sealed parts

Schneider Electric · LV454444

Every part on Stoklink is new, unused and made by the manufacturer named on the page.

Condition
New and unused, in the manufacturer's factory-sealed packaging.
Sourced from
Schneider Electric and its authorised distributors.
Warranty
The manufacturer's warranty applies.
If a part is not genuine
We refund the full amount.

Added to cart Could not add to cart

View cart