TeSys GV4Schneider Electric GV4PEM80B TeSys GV4 MPCB, 3P 80 A, 25 kA Icu at 400 V, multifunction trip unit.
The Schneider Electric GV4PEM80B is a 3-pole TeSys GV4 motor circuit breaker rated 80 A continuous current with a 25 kA breaking capacity (Icu) at 380-415 V AC. It provides thermal-magnetic protection with NFC-adjustable multifunction motor protection for 3-phase motors from 22-37 kW at 400 V, with a 40-80 A thermal setting range and toggle start-stop control.
Beyond the 40-80 A thermal dial, the multifunction trip unit lets a technician tune short-time delay (Isd, 5-13 x Ir), phase unbalance and loss, ground-fault, locked-rotor and long-start protection over NFC from a smartphone, and accepts 1-2 external SDx modules for alarm and fault differentiation. The trailing B in the catalog number identifies the breaking-capacity class Schneider assigns within the GV4 range (B/N/S step up from economy to high short-circuit withstand); this unit falls in the economy 25 kA tier, so it should be matched to the prospective short-circuit current at the installation point rather than swapped for a lower class to save cost on a feeder with higher fault levels. For the 80 A frame, internal mounting positions accept OF/SD auxiliary contact blocks and MN/MX voltage trip units without changing the breaker's footprint, which keeps a panel design consistent across the motor power range it covers.
| Range | TeSys Deca |
|---|---|
| Range of Product | TeSys GV4 |
| Device short name | GV4PEM |
| Product name | TeSys GV4 |
| Product or Component Type | Motor circuit breaker |
| Device Application | Motor protection |
| Trip unit technology | Electronic, Thermal-magnetic |
| Poles description | 3P |
|---|---|
| Utilisation category | Category A IEC 60947-2, AC-3 IEC 60947-4-1 |
| Operating position | Any position |
| Motor power kW | 37 kW 400...415 V AC 50/60 Hz, 45 kW 500 V AC 50/60 Hz, 22 kW 400...415 V AC 50/60 Hz, 30 kW 500 V AC 50/60 Hz, 37 kW 660...690 V AC 50/60 Hz, 45 kW 660...690 V AC 50/60 Hz, 55 kW 660...690 V AC 50/60 Hz, 30 kW 400...415 V AC 50/60 Hz, 37 kW 500 V AC 50/60 Hz |
| Breaking capacity | 50 kA Icu 220...240 V AC 50/60 Hz IEC 60947-2, 25 kA Icu 380...415 V AC 50/60 Hz IEC 60947-2, 20 kA Icu 440 V AC 50/60 Hz IEC 60947-2, 10 kA Icu 500 V AC 50/60 Hz IEC 60947-2, 35 kA 208Y/120 V AC 50/60 Hz UL 60947, 35 kA 240 V AC 50/60 Hz UL 60947, 18 kA 480Y/277 V AC 50/60 Hz UL 60947, 14 kA 600Y/347 V AC 50/60 Hz UL 60947 |
| Control Type | Toggle |
| Line Rated Current | 80 A |
| Magnetic tripping current | 1360 A |
| [Ue] rated operational voltage | 690 V AC 50/60 Hz IEC 60947-2 |
| [Ui] rated insulation voltage | 800 V AC 50/60 Hz IEC 60947-2 |
| [Ith] conventional free air thermal current | 115 A IEC 60947-4-1 |
| [Uimp] rated impulse withstand voltage | 8 kV IEC 60947-2 |
| Power dissipation per pole | 4.6 W |
| Mechanical durability | 40000 cycles |
| Electrical durability | 5000 cycles AC-3 415 V opening, 5000 cycles AC-3 440 V closing |
| maximum operating rate | 25 cyc/h |
| Rated duty | Continuous IEC 60947-4-1 |
| Connections - terminals | EverLink BTR screw connectors (top): 1 cable(s) 0.002…0.1 in² (1.5…70 mm²) - solid, EverLink BTR screw connectors (top): 1 cable(s) 0.002…0.08 in² (1.5…50 mm²) - flexible, EverLink BTR screw connectors (bottom): 1 cable(s) 0.004…0.1 in² (2.5…95 mm²) - solid, EverLink BTR screw connectors (bottom): 1 cable(s) 0.004…0.1 in² (2.5…70 mm²) - flexible |
| Tightening torque | 79.7 lbf.in (9 N.m) 0.02…0.1 in² (16…95 mm²), 44.3 lbf.in (5 N.m) 0.002…0.02 in² (1.5…10 mm²) |
| Mechanical robustness | Vibrations +/- 1 mm 2...13.2 Hz IEC 60068-2-6, Vibrations 0.7 gn 13.2...100 Hz IEC 60068-2-6, Shocks 15 gn 11 ms IEC 60068-2-27 |
| Phase failure sensitivity | Yes IEC 60947-4-1 |
| Height | 6.1 in (155 mm) |
| Width | 3.2 in (81 mm) |
| Depth | 4.6 in (116 mm) |
| Net Weight | 3.20 lb(US) (1.45 kg) |
| color | Gray RAL 7016) |
| Suitability for isolation | Yes IEC 60947-1 |
| Standards | CSA C22.2 No 60947-4-1, UL 60947-4-1, EN/IEC 60947-4-1, EN/IEC 60947-2 |
|---|---|
| Product Certifications | IEC, UL, CSA, CCC, EAC, ATEX, EU-RO MR |
| Climatic withstand | IACS E10 |
| IK degree of protection | IK07 IEC 62262 |
| Pollution degree | 3 |
| IP degree of protection | IP40 IEC 60529 |
| Ambient Air Temperature for Storage | -58…185 °F (-50…85 °C) |
| Fire resistance | 1760 °F (960 °C) IEC 60695-2-11 |
| Operating altitude | 5000 m |
| Ambient air temperature for operation | -13…158 °F (-25…70 °C) |
| Part number | GV4PEM80B |
|---|---|
| Type designation | GV4PEM |
| Brand | Schneider Electric |
| Condition | New, factory sealed |
| Source | Schneider Electric and its authorised distributors |
| Warranty | Manufacturer warranty |
| Lifecycle status | Active, in production |
| EAN | 3606481310736 |
| Warranty (in months) | 18 |
|---|
| Country of origin | PL |
|---|---|
| Shipping weight | 1.45 kg |
| Ships from | Türkiye |
| Dispatch | — |
| Stock | On request |
Source: manufacturer data · Last verified: 30 Oct 2026
No documents are on file for this part yet.
Ask us for the datasheetThe rated current of GV4PEM is 80 A.
The rated operational voltage of GV4PEM is 690 V AC.
The rated motor power of GV4PEM is 22–37 kW.
The tariff (HS) code on file for GV4PEM is 853620.
The EAN (GTIN) of GV4PEM is 3606481310736.
GV4PEM ships from Türkiye. Shipping calculated at checkout · import duties and taxes paid on arrival.
A side-by-side technical comparison of Schneider TeSys GV2/GV3, ABB MS132/MS165, and Siemens SIRIUS 3RV2 motor protection circuit breakers on frame size, terminals, phase-loss protection,...
A practical walkthrough of setting an MPCB's thermal dial to nameplate FLC, verifying the magnetic trip and trip class, and confirming Type 2 coordination...
A comparison of MCB and dedicated MPCB protection for motor circuits, covering curve selection, adjustable overload setting, trip class, and coordination.
