Types of Molded Case Circuit Breakers: MCCB Guide for Engineers
Compare MCCB types including thermal-magnetic, electronic trip, motor protection, current-limiting, and DC-rated units for industrial use. Shop at Stoklink.
- Part number
- C10F1TM016
- Model no
- NSX100F
Schneider Electric C10F1TM016 ComPacT NSX100F 1P 16 A 18 kA at 240 V TM-D Fixed Moulded Case Circuit Breaker
ComPacT NSX100F 1P 16 A AC/DC breaker, 18 kA Icu, TM-D fixed trip unit
Description
About the NSX100F
About the NSX100F
The Schneider Electric C10F1TM016 is a 1P ComPacT NSX100F moulded case circuit breaker rated 16 A, dual-rated for AC (277 V) and DC (250 V) circuits, with an 18 kA breaking capacity (Icu) at 240 V AC. It uses a fixed, non-adjustable TM-D thermal-magnetic trip unit, giving compact, low-maintenance overload and short-circuit protection in small-frame distribution and DC applications.
Certifications & Standards
- EN/IEC 60947-2
Selection Notes
The TM-D trip unit on this NSX100F frame is fixed rather than adjustable: L overload protection is set at 1 x In and I instantaneous protection trips at 190 A, so the 16 A rating itself is the only selection variable — pick it to sit just above the circuit's full-load current. Use the 1-pole version on a single AC line-to-neutral or two-wire DC circuit; it is not a substitute for a 2-pole device on a two-wire ungrounded or floating AC circuit. Because the breaker is dual-rated for AC and DC, the same part also fits DC distribution and battery circuits up to 250 V DC, where the 18 kA AC Icu figure does not apply and the 36 kA DC rating governs instead.
Specification
Full specification
Main 20
| Range | ComPacT |
|---|---|
| Product name | ComPacT NSX |
| Device short name | NSX100F |
| Product or component type | Circuit breaker |
| Device application | Distribution |
| Poles description | 1P |
| Protected poles description | 1D |
| [In] rated current | 16 A at 40 °C |
| [Ue] rated operational voltage | 277 V AC 50/60 Hz, 250 V DC |
| Network type | AC, DC |
| Network frequency | 50/60 Hz |
| Suitability for isolation | Yes conforming to EN/IEC 60947-2 |
| Utilisation category | Category A |
| Breaking capacity | 18 kA Icu at 220/240 V AC 50/60 Hz conforming to IEC 60947-2, 36 kA Icu at 250 V DC conforming to IEC 60947-2 |
| Breaking capacity code | F 18 kA 240 V AC |
| Trip unit name | TM-D |
| Trip unit technology | Thermal-magnetic |
| Trip unit protection functions | LI |
| Control type | Toggle |
| Circuit breaker mounting mode | Fixed |
Complementary 23
| [Ui] rated insulation voltage | 750 V AC 50/60 Hz conforming to IEC 60947-2 |
|---|---|
| [Uimp] rated impulse withstand voltage | 8 kV conforming to IEC 60947-2 |
| [Ics] rated service breaking capacity | 18 kA at 220/240 V AC 50/60 Hz conforming to IEC 60947-2, 36 kA at 250 V DC conforming to IEC 60947-2 |
| Mechanical durability | 20000 cycles |
| Electrical durability | 20000 cycles at 277 V In/2, 10000 cycles at 277 V In |
| Power dissipation per pole | 2.92 W |
| Mounting support | Backplate |
| Mounting position | Horizontal and vertical, Flat on the back |
| Upside connection | Front |
| Downside connection | Front |
| Connection pitch | 35 mm |
| Protection type | L : for overload protection (thermal), I : for short-circuit protection (magnetic) |
| Trip unit rating | 16 A at 40 °C |
| Long-time pick-up adjustment type Ir (thermal protection) | Fixed |
| [Ir] long-time protection pick-up adjustment range | 1 x In |
| Long-time protection delay adjustment type tr | Fixed |
| Instantaneous protection pick-up adjustment type Ii | Fixed |
| [Ii] instantaneous protection pick-up adjustment range | 190 A |
| Earth-leakage protection | Without |
| Width (W) | 35 mm |
| Height (H) | 161 mm |
| Depth (D) | 86 mm |
| Net weight | 0.7 kg |
Environment 10
| Standards | EN/IEC 60947-2 |
|---|---|
| Overvoltage category | IV |
| Electrical shock protection class | Class II on front face |
| Pollution degree | 3 conforming to IEC 60664-1 |
| IP degree of protection | IP40 conforming to IEC 60529 |
| IK degree of protection | IK07 conforming to IEC 62262 |
| Ambient air temperature for operation | -25…70 °C |
| Ambient air temperature for storage | -50…85 °C |
| Relative humidity | 0…95 % |
| Operating altitude | 0...2000 m without derating, 2000 m...5000 m with derating |
Show all 77 specifications ↓ Show less ↑24 more values in Identification, Contractual warranty, Logistics.
Identification 7
| Part number | C10F1TM016 |
|---|---|
| Type designation | NSX100F |
| Brand | Schneider Electric |
| Condition | New, factory sealed |
| Source | Schneider Electric and its authorised distributors |
| Warranty | Manufacturer warranty |
| Lifecycle status | Active, in production |
Contractual warranty 1
| Warranty (in months) | 18 |
|---|
Logistics 16
| Unit Type of Package 1 | PCE |
|---|---|
| Number of Units in Package 1 | 1 |
| Package 1 Height | 4.3 cm |
| Package 1 Width | 13.0 cm |
| Package 1 Length | 17.5 cm |
| Package 1 Weight | 732.0 g |
| Unit Type of Package 2 | S03 |
| Number of Units in Package 2 | 12 |
| Package 2 Height | 30.0 cm |
| Package 2 Width | 30.0 cm |
| Package 2 Length | 40.0 cm |
| Package 2 Weight | 9.18 kg |
| Shipping weight | 0.7 kg |
| Ships from | Türkiye |
| Dispatch | — |
| Stock | On request |
Source: manufacturer data · Last verified: 30 Oct 2026
Documents
Documents for C10F1TM016
No documents are on file for this part yet.
Ask us for the datasheet
Certifications
Certifications and standards
- EN/IEC 60947-2
Quick answers
Questions about the NSX100F
What is the rated current of NSX100F?
The rated current of NSX100F is 16 A.
Which supply voltage is NSX100F rated for?
The rated operational voltage of NSX100F is 277 V AC.
What is the HS code of NSX100F for customs?
The tariff (HS) code on file for NSX100F is 85362090.
Where does NSX100F ship from, and how fast?
NSX100F ships from Türkiye. Shipping calculated at checkout · import duties and taxes paid on arrival.
Guides
Guides for MCCB
How to Select the Right MCCB for Your Application: Engineer Checklist
Select the right MCCB with our engineer checklist covering IEC 60947-2, sizing, breaking capacity, trip units, and derating for industry. Shop at Stoklink.
IEC 60947-2 Standards for Molded Case Circuit Breakers Explained
IEC 60947-2 defines MCCB ratings Icu, Ics, Icw, utilization categories A and B, and type tests for low-voltage circuit breakers up to 1000V. Shop...
Reviews
Customer reviews
Series
Schneider Electric Schneider ComPacT NSX
- Brand
- Schneider Electric
- Series
- Schneider ComPacT NSX
