Main Components of a PLC System: Complete Guide for Engineers
Master PLC system components: CPU, power supply, I/O modules, communication interfaces, and software with sizing formulas and selection tips. Shop at Stoklink.
- Part number
- ABL8RPS24030
- UL
- EAC
Modicon Power SupplySchneider Electric ABL8RPS24030 Modicon 24 V DC 3 A 1/2-Phase 100-500 V AC Regulated Power Supply
Modicon power supply, 100-500 V AC in, 24 V DC / 3 A / 72 W out, 44 mm wide, DIN rail mount.
Description
About the ABL8RPS24030
About the ABL8RPS24030
The Schneider Electric ABL8RPS24030 is a Modicon Power Supply range regulated switch-mode power supply built for wide-range 100-500 V AC installations. It converts single or two-phase mains into a regulated 24 V DC output rated at 3 A and 72 W, with a built-in power-factor-correction filter and automatic-reset overload protection. At 44 mm wide, it mounts on 35 mm DIN rail alongside GB2 or GV2 circuit breakers.
Certifications & Standards
- CE
- CCSAus
- EAC
- UL
- RCM
- KC
- CSA C22.2 No 60950-1
- UL 508
- EN/IEC 62368-1
Selection Notes
The ABL8RPS24030's 3 A / 72 W rating fits a single compact PLC, a handful of sensors or a small I/O block on a 24 V DC bus. Step up to the 5 A, 10 A or 20 A variants in the same Modicon Power Supply range as more field devices or a second I/O rack are added, since all four accept the same wide 100-500 V AC input and mount the same way.
Specification
Full specification
Main 9
| Range of Product | Modicon Power Supply |
|---|---|
| Product or Component Type | Power supply |
| Power supply type | Regulated switch mode |
| Nominal input voltage | 100...120 V AC single phase N-L1, 200...500 V AC phase to phase L1-L2 |
| Rated power in W | 72 W |
| Output voltage | 24 V DC |
| Power supply output current | 3 A |
| Permissible temporary current boost | 1.5 x In for 4 s) |
| Anti-harmonic filter | Low frequency harmonic currents |
Complementary 20
| Efficiency at full load | 170...550 V AC, 85...132 V AC |
|---|---|
| Inrush current | 30 A |
| Power factor | 0.51 at 240 V AC, 0.59 at 120 V AC |
| Efficiency | 87 % |
| Output voltage adjustment | 24...28.8 V adjustable |
| Power dissipation in W | 7.8 W |
| Provided equipment | Power factor correction filter IEC 61000-3-2 |
| Output protection type | Against overload, protection technology: manual or automatic reset, Against overvoltage, protection technology: 30...32 V, manual reset, Against short-circuits, protection technology: manual or automatic reset, Against undervoltage, protection technology: tripping if U < 21.6 V, Thermal, protection technology: automatic reset |
| Connections - terminals | Screw type terminals 3 x 0.5...3 x 4 mm², 22 AWG...12 AWG) input connection, Screw type terminals 1 x 0.5...1 x 4 mm², 22 AWG...12 AWG) input ground connection, Screw type terminals 4 x 0.5...4 x 4 mm², 22 AWG...12 AWG) output connection, Screw type terminals 1 x 0.5...1 x 4 mm², 22 AWG...12 AWG) output ground connection |
| Status LED | 1 LED (green and red) output voltage, 1 LED (green, red and orange) output current |
| Depth | 4.9 in (125 mm) |
| Height | 4.9 in (125 mm) |
| Width | 1.8 in (45 mm) |
| Net Weight | 0.7 lb(US) (0.3 kg) |
| Output coupling | Parallel, Series |
| Marking | CE |
| Mounting support | 35 x 15 mm symmetrical DIN rail, 35 x 7.5 mm symmetrical DIN rail |
| Operating position | Vertical |
| Supply | SELV IEC 60950-1, SELV IEC 60204-1, SELV IEC 60364-4-41 |
| Dielectric strength | 3500 V with between input and ground, 4000 V with between input and output, 500 V with between output and ground |
Environment 6
| Standards | CSA C22.2 No 60950-1, UL 508, EN/IEC 62368-1 |
|---|---|
| Product certifications | CCSAus, EAC, UL, RCM, KC |
| Environmental characteristic | EMC conforming to IEC 61000-6-1, EMC conforming to IEC 61000-6-3, EMC conforming to IEC 61000-6-2, EMC conforming to IEC 61000-6-4, EMC conforming to EN/IEC 61204-3, Safety conforming to IEC 60950-1, Safety conforming to EN/IEC 61204-3 |
| Operating altitude | 6561.68 ft (2000 m) |
| IP degree of protection | IP20 conforming to IEC 60529 |
| Ambient air temperature for operation | 122…140 °F (50…60 °C) with derating factor mounting position A < 6561.68 ft (2000 m), -13…122 °F (-25…50 °C) without derating mounting position A < 6561.68 ft (2000 m) |
Show all 48 specifications ↓ Show less ↑13 more values in Identification, Contractual warranty, Logistics.
Identification 7
| Part number | ABL8RPS24030 |
|---|---|
| Brand | Schneider Electric |
| Condition | New, factory sealed |
| Source | Schneider Electric and its authorised distributors |
| Warranty | Manufacturer warranty |
| Lifecycle status | Active, in production |
| EAN | 3389119405607 |
Contractual warranty 1
| Warranty (in months) | 18 |
|---|
Logistics 5
| Country of origin | PH |
|---|---|
| Shipping weight | 0.3 kg |
| Ships from | Türkiye |
| Dispatch | — |
| Stock | On request |
Source: manufacturer data · Last verified: 30 Oct 2026
Documents
Documents for ABL8RPS24030
No documents are on file for this part yet.
Ask us for the datasheet
Certifications
Certifications and standards
- UL
- EAC
- CSA C22.2 No 60950-1
- UL 508
- EN/IEC 62368-1
Quick answers
Questions about the ABL8RPS24030
What is the rated current of ABL8RPS24030?
The rated current of ABL8RPS24030 is 3 A.
Which supply voltage is ABL8RPS24030 rated for?
The rated operational voltage of ABL8RPS24030 is 100–500 V AC.
What is the HS code of ABL8RPS24030 for customs?
The tariff (HS) code on file for ABL8RPS24030 is 850440.
What is the EAN of ABL8RPS24030?
The EAN (GTIN) of ABL8RPS24030 is 3389119405607.
Where does ABL8RPS24030 ship from, and how fast?
ABL8RPS24030 ships from Türkiye. Shipping calculated at checkout · import duties and taxes paid on arrival.
Guides
Guides for power supplies
Reviews
Customer reviews
Series
Schneider Electric Modicon Power Supply
- Brand
- Schneider Electric
- Series
- Modicon Power Supply
