- Part number
- 2CDD281101R0032
- Model no
- SD201/32
Switch DisconnectorsABB 2CDD281101R0032 SD201/32 1P 32A 253V AC Switch Disconnector
ABB SD201/32 1P switch disconnector, In 32 A, 253 V AC, 25 kA conditional short-circuit rating, DIN-rail mounted.
Description
About the SD201/32
About the SD201/32
Rated 32 A at up to 253 V AC, the ABB SD201/32 (SKU 2CDD281101R0032) is the higher-current single-pole member of the SD201 switch disconnector range. It shares the same 17.5 mm module width and 25 kA conditional short-circuit rating as its 25 A sibling, so swapping between the two is a matter of load current, not panel space or terminal capacity.
Certifications & Standards
- IEC/EN 60947-3
Selection Notes
The 32 A rating on this 1P SD201/32 covers single-phase loads that exceed the 25 A sibling's capacity while keeping the identical 1-module, 17.5 mm footprint. As a disconnector rather than a breaker, it provides local isolation for maintenance or lockout but relies on upstream devices for fault clearing. Choose it over the 25 A variant whenever the circuit's continuous current approaches or exceeds 25 A, since running a 25 A-rated switch near its limit shortens contact life.
Specification
Full specification
Technical 17
| Contact Position Indication | ON / OFF |
|---|---|
| Electrical Endurance | 10000 AC cycle |
| Mechanical Endurance | 20000 cycle |
| Number of Poles | 1P |
| Tightening Torque | 2.8 N·m |
| Utilization Category | Switching of motor loads or other highly inductive loads - frequent actuation (AC-23A), Switching of resistive loads, including moderate overloads - frequent actuation (DC-21A) |
| Screw Terminal Type | Failsafe Bi-directional Cylinder-lift Terminal |
| Switch Type | Off |
| Actuator Marking | I / O |
| Actuator Material | Insulation Group II, Red, Sealable |
| Recommended Screw Driver | Pozidriv 2 |
| Accessories Available | Yes |
| Cover Color | Grey |
| Connecting Capacity | Busbar 10/10 mm², Flexible with Ferrule 0.75 ... 25 mm², Flexible 0.75 ... 25 mm², Rigid 0.75 ... 35 mm², Stranded 0.75 ... 35 mm² |
| Installation Size | acc. to DIN 43880 3 |
| Terminal Type | Screw Terminals |
| Actuator Type | Toggle |
Electrical 15
| Rated Voltage (Ur) | 253 V, 12 V Minimum |
|---|---|
| Rated Operational Voltage | 253 V AC, 60 V DC |
| Operational Voltage | Maximum 266 V AC, Maximum 63 V DC, Minimum 12 V AC |
| Voltage Protection Level ( Up) | 4 kV |
| Rated Impulse Withstand Voltage (Uimp) | 4 kV, at 2000 m 5 kV, at Sea Level 6.2 kV |
| Input Voltage Type | AC/DC |
| Rated Current (In) | 32 A |
| Rated Short-Circuit Capacity | (230 / 400 V AC) 25 kA |
| Rated Conditional Short-Circuit Current (Inc) | 25 kA |
| Rated Frequency (f) | 50 / 60 Hz, DC |
| Power Loss | at Rated Operating Conditions per Pole 1 W |
| Number of Contacts CO | 0 |
| Number of Contacts NC | 0 |
| Number of Contacts NO | 1 |
| Overvoltage Category | III |
Design 1
| Housing Material | Insulation Group I, RAL 7035 |
|---|
Show all 74 specifications ↓ Show less ↑41 more values in Identification, Material Compliance, Environmental, Dimensions, Installation, External Classifications and Standards, Logistics.
Identification 11
| Part number | 2CDD281101R0032 |
|---|---|
| Type designation | SD201/32 |
| Brand | ABB |
| Condition | New, factory sealed |
| Source | ABB and its authorised distributors |
| Warranty | Manufacturer warranty |
| EAN | 4016779904087 |
| ETIM class | EC001047 |
| eCl@ss | 27142301 |
| Package Level 1 Units | carton 10 piece |
| Package Level 1 Gross Weight | 0.9 kg |
Material Compliance 6
| RoHS Information | Following EU Directive 2011/65/EU and Amendment 2015/863 July 22, 2019 |
|---|---|
| RoHS Date | 20260312 |
| REACH Information | False - does not contain substances > 0.1 mass percentage |
| REACH Date | 20260312 |
| WEEE Category | 5. Small Equipment (No External Dimension More Than 50 cm) |
| WEEE B2C / B2B | Business To Consumer |
Environmental 6
| Ambient Air Temperature | Operation -25 ... +55 °C, Storage -40 ... +70 °C |
|---|---|
| Degree of Protection | IP20, Enclosure with Cover IP40 |
| Pollution Degree | 3 |
| Environmental Conditions | 28 cycles, with 55 °C / 90-96 %, and 25 °C / 95-100 % |
| Resistance to Vibrations | 20 Cycles with Load 0.8 In: 5g 5 ... 150 ... 5 Hz |
| Resistance to Shock acc. to IEC 60068-2-27 | 25g 2 shocks 13 ms |
Dimensions 6
| Width in Number of Modular Spacings | 1 |
|---|---|
| Product Net Width | 17.5 mm |
| Product Net Height | 88 mm |
| Product Net Depth / Length | 69 mm |
| Product Net Weight | 0.085 kg |
| Built-In Depth (t2) | 69 mm |
Installation 2
| Mounting Type | DIN-Rail |
|---|---|
| Mounting Position | any |
External Classifications and Standards 6
| ETIM 10 | EC001047 - Selective main line circuit breaker |
|---|---|
| UNSPSC | 39122233 |
| eClass | V11.0 : 27142301 |
| Standards | IEC/EN 60947-3 |
| Certification Agency | IEC, EN |
| Standardization Body | EN, IEC |
Logistics 4
| Shipping weight | 0.085 kg |
|---|---|
| Ships from | Türkiye |
| Dispatch | — |
| Stock | On request |
Source: manufacturer data · Last verified: 02 Oct 2026
Documents
Documents for 2CDD281101R0032
No documents are on file for this part yet.
Ask us for the datasheet
Certifications
Certifications and standards
- IEC/EN 60947-3
Quick answers
Questions about the SD201/32
What is the rated current of SD201/32?
The rated current of SD201/32 is 32 A.
Which supply voltage is SD201/32 rated for?
The rated operational voltage of SD201/32 is 253 V AC.
What is the HS code of SD201/32 for customs?
The tariff (HS) code on file for SD201/32 is 853650.
What is the EAN of SD201/32?
The EAN (GTIN) of SD201/32 is 4016779904087.
Where does SD201/32 ship from, and how fast?
SD201/32 ships from Türkiye. Shipping calculated at checkout · import duties and taxes paid on arrival.
Reviews
Customer reviews
Series
ABB Switch Disconnectors
- Brand
- ABB
- Series
- Switch Disconnectors
