Siemens 6ES7132-6BF01-0BA0 SIMATIC ET 200SP DQ 8x24VDC/0.5A ST 8DO Source Remote I/O Module

The Siemens 6ES7132-6BF01-0BA0 is a SIMATIC ET 200SP digital output module with 8 channels of 24 V DC source (PNP) outputs rated 0.5 A each, meeting IEC 61131 type 0.5. It mounts on a Type A0 BaseUnit, electronically limits short-circuit current to 0.7-1.3 A, and reports wire-break, short-circuit, and supply-voltage diagnostics per channel.

Technical Specifications

Selection Notes

At 0.5 A per channel and 4 A total per module, this 8-channel DQ variant suits distributed loads such as solenoid valves or indicator lamps where no single channel needs more than 0.5 A; a 16-channel version in the same family shares the per-channel rating but leaves less thermal headroom per module if every channel switches simultaneously. The electronic short-circuit protection trips at 0.7-1.3 A and auto-recovers, so it substitutes for external output fusing on most 24 V loads. Parallel switching of two channels is supported for redundant control of a single load, useful where a failed output must not silently drop a critical actuator.

Applications

Drives 8 discrete 24 V DC loads - solenoid valves, contactor coils, indicator lamps - from a SIMATIC ET 200SP station, with substitute-value output and per-channel diagnostics reported to the PROFINET or PROFIBUS controller.