Schneider Electric XACA271 XACA

Take control of your industrial lifting and hoist systems with the Schneider Electric XACA271 pendant control station from the Harmony XAC range. Built for rugged operations and reliable performance, it delivers essential control in a compact double-insulated enclosure.

Key Features & Benefits

• 2 Push-Button Control
  Includes two “normally open” (NO) slow-break push-buttons: one for “raise/slow”, the other for “lower/slow”.

• Mechanical Interlocking
  Buttons are mechanically interlocked to prevent accidental simultaneous opposing directions.

• Robust Enclosure Material
  Yellow polypropylene body, double-insulated for operator safety.

• High Protection Ratings

  • IP65: protection from dust and water jets ﴾suitable for indoor & outdoor environments﴿

  • IK08: impact resistance to withstand mechanical shock

• Wide Operating Conditions
  Operates between −25 °C to +70 °C; storage range between −40 °C and +70 °C. Offers good resilience to vibration and shock (15 g, 10–500 Hz for vibration; 100 g for shock)

• Flexible Wiring & Cable Entries

  • Screw-clamp terminals: 0.5…2.5 mm² without cable end; 0.5…2×1.5 mm² with cable end.

  • Cable entry via a rubber sleeve (stepped entry) for cable diameters ~8…26 mm.

• Long Mechanical Life & Safety Standards

  • Rated for 1,000,000 mechanical cycles

  • Complies with major international standards: EN/IEC 60947-5-1, EN/IEC 60204-32, UL 508, CSA, CCC, GOST etc.

• Electrical Ratings

  • Conventional enclosed thermal current: 10 A

  • Contact performance: e.g. AC-15 up to 240 V / 3 A; at higher voltages lower currents permitted; DC-13 ratings as per IEC 60947-5-1.

Typical Applications

• Single-speed hoist or crane controls (up/down movements, slow speed)

• Material handling systems requiring simple, rugged control stations

• Outdoor or industrial environments exposed to dust, water, impact and vibration

• Retrofit or new installations where IP65 pendant control is needed