{"product_id":"siemens-6es7134-6td00-0ca1-et200sp-ai-4xi-hart","title":"Siemens 6ES7134-6TD00-0CA1 SIMATIC ET 200SP AI 4xI 2-Wire HART Analog Input Module","description":"\u003cp\u003eThe Siemens 6ES7134-6TD00-0CA1 is a SIMATIC ET 200SP analog input module with 4 HART-capable channels for 2-wire 4-20 mA transmitters, delivering 15-bit-plus-sign resolution and channel-by-channel diagnostics. It mounts on BU type A0 or A1 base units, runs from a 24 V DC supply (19.2-28.8 V range), and supports reparameterization while the station is in RUN.\u003c\/p\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003e6ES7134-6TD00-0CA1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEAN\u003c\/td\u003e\n\u003ctd\u003e4047623404972\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eSiemens\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSeries\u003c\/td\u003e\n\u003ctd\u003eSIMATIC ET 200SP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct type designation\u003c\/td\u003e\n\u003ctd\u003eAI 4xI 2-wire HART\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUsable BaseUnits\u003c\/td\u003e\n\u003ctd\u003eBU type A0, A1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupply voltage\u003c\/td\u003e\n\u003ctd\u003e24 V DC, 19.2-28.8 V permissible range\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCurrent consumption, max.\u003c\/td\u003e\n\u003ctd\u003e25 mA (without sensor supply)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNumber of analog inputs\u003c\/td\u003e\n\u003ctd\u003e4, differential, for current measurement\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput range\u003c\/td\u003e\n\u003ctd\u003e4 mA to 20 mA, 15 bit + sign\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput resistance\u003c\/td\u003e\n\u003ctd\u003e280 Ohm + approx. 0.35 V diode forward voltage\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eResolution with overrange, max.\u003c\/td\u003e\n\u003ctd\u003e16 bit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBasic error limit at 25 C\u003c\/td\u003e\n\u003ctd\u003e+\/- 0.3 percent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperational error limit, full temp. range\u003c\/td\u003e\n\u003ctd\u003e+\/- 0.5 percent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLinearity error\u003c\/td\u003e\n\u003ctd\u003e+\/- 0.01 percent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable length, shielded, max.\u003c\/td\u003e\n\u003ctd\u003e800 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiagnostics\u003c\/td\u003e\n\u003ctd\u003ewire break, short-circuit, group error, overflow\/underflow, channel-by-channel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAmbient temperature, horizontal installation\u003c\/td\u003e\n\u003ctd\u003e-30 to 60 C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions (W x H x D)\u003c\/td\u003e\n\u003ctd\u003e15 x 73 x 58 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.037 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003eSelection Notes\u003c\/h2\u003e\u003cp\u003eThe HART channel support is the reason to pick this module over a standard ET 200SP AI 4xI without HART: it reads the superimposed HART signal from 2-wire loop-powered transmitters for diagnostics and remote configuration while still delivering the process value through the normal 4-20 mA path. Reparameterization in RUN means channel ranges and smoothing can be adjusted without pulling the station out of service, which matters when a HART transmitter needs to be recalibrated on a live line. The BU type A0\/A1 requirement fixes the base unit choice at station design time, so confirm the BaseUnit slot before ordering.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eFits ET 200SP distributed I\/O stations that read HART pressure, flow, level, or temperature transmitters and need channel diagnostics (wire break, short-circuit) reported back to the controller without separate HART multiplexer hardware.\u003c\/p\u003e","brand":"Siemens","offers":[{"title":"Default Title","offer_id":53960485798171,"sku":"6ES7134-6TD00-0CA1","price":690.41,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0903\/7722\/4475\/files\/siemens-6es7134-6td00-0ca1-et200sp-ai4xi-hart-remote-io-module.png?v=1789679413","url":"https:\/\/stoklink.com\/products\/siemens-6es7134-6td00-0ca1-et200sp-ai-4xi-hart","provider":"Stoklink","version":"1.0","type":"link"}