{"product_id":"siemens-6es7132-6bh00-0aa0-dq16x24vdc-io-module","title":"Siemens 6ES7132-6BH00-0AA0 SIMATIC ET 200SP DQ 16x24VDC\/0.5A BA Remote I\/O Module","description":"\u003cp\u003eThe Siemens 6ES7132-6BH00-0AA0 is a SIMATIC ET 200SP digital output module with 16 channels rated 24 VDC at 0.5 A per channel, delivering up to 8 A per module. It mounts on BaseUnit type A0 and communicates diagnostic and channel-status information over the backplane bus for either PROFINET or PROFIBUS I\/O stations.\u003c\/p\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003e6ES7132-6BH00-0AA0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eSiemens\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSeries\u003c\/td\u003e\n\u003ctd\u003eSIMATIC ET 200SP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct type designation\u003c\/td\u003e\n\u003ctd\u003eDQ 16x24VDC\/0.5A BA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNumber of digital outputs\u003c\/td\u003e\n\u003ctd\u003e16\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput type\u003c\/td\u003e\n\u003ctd\u003eSource output (PNP)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRated supply voltage\u003c\/td\u003e\n\u003ctd\u003e24 V DC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePermissible voltage range\u003c\/td\u003e\n\u003ctd\u003e19.2 to 28.8 V DC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRated output current per channel\u003c\/td\u003e\n\u003ctd\u003e0.5 A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCurrent per module, max.\u003c\/td\u003e\n\u003ctd\u003e8 A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShort-circuit protection\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eResponse threshold (short-circuit)\u003c\/td\u003e\n\u003ctd\u003e1.4 A typ. (0.7 to 1.9 A)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSwitching frequency, resistive load\u003c\/td\u003e\n\u003ctd\u003e100 Hz max.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSwitching frequency, inductive load\u003c\/td\u003e\n\u003ctd\u003e2 Hz max.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAddress space\u003c\/td\u003e\n\u003ctd\u003e2 byte (outputs)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBaseUnit\u003c\/td\u003e\n\u003ctd\u003eType A0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable length, shielded\u003c\/td\u003e\n\u003ctd\u003e1000 m max.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable length, unshielded\u003c\/td\u003e\n\u003ctd\u003e600 m max.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAmbient temperature, horizontal install\u003c\/td\u003e\n\u003ctd\u003e-30 to 60 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAmbient temperature, vertical install\u003c\/td\u003e\n\u003ctd\u003e-30 to 50 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions (W x H x D)\u003c\/td\u003e\n\u003ctd\u003e15 x 73 x 58 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e30 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003eSelection Notes\u003c\/h2\u003e\u003cp\u003eThe 0.5 A per-channel rating on this module fits small relay coils, indicator lamps, and solenoid valves rather than heavier contactor coils; the 8 A per-module limit means all 16 channels cannot run at full rated current simultaneously across the same module. Parallel switching of two outputs is supported for redundant control of a single load, useful where a failed output must not stop the process. Group-error and short-circuit diagnostics report back through the backplane bus, so a station built from several of these modules still gives channel-level fault isolation without extra wiring. It requires BaseUnit type A0 (1-wire); multi-wire potential distribution needs an additional potential distributor module on the same BaseUnit type.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eUsed in SIMATIC ET 200SP remote I\/O stations for switching indicator lamps, small relays, and 24 VDC solenoid valves in machine control panels and distributed field enclosures where PROFINET or PROFIBUS connects the station back to the controller.\u003c\/p\u003e","brand":"Siemens","offers":[{"title":"Default Title","offer_id":53960461910299,"sku":"6ES7132-6BH00-0AA0","price":128.88,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0903\/7722\/4475\/files\/siemens-6es7132-6bh00-0aa0-et200sp-dq-remote-io-module.png?v=1789662736","url":"https:\/\/stoklink.com\/products\/siemens-6es7132-6bh00-0aa0-dq16x24vdc-io-module","provider":"Stoklink","version":"1.0","type":"link"}