{"product_id":"schneider-electric-bmh0703p16a2a","title":"Schneider Electric BMH0703P16A2A Lexium 32 BMH 3.4 N·m 8000 rpm 70 mm Flange Keyed Shaft Servo Motor","description":"\u003cp\u003eThe Schneider Electric BMH0703P16A2A is a Lexium 32 BMH servo motor delivering 3.4 N·m continuous stall torque, paired with the LXM32.D18N4 servo drive for a 1300 W nominal output at 5000 rpm nominal speed. It draws 3.91 A continuous stall current from a 480 V three-phase supply and reaches 8000 rpm maximum mechanical speed. The keyed-shaft, IP54-rated motor has no holding brake and mounts on a 70 mm international-standard flange.\u003c\/p\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003eReference\u003c\/td\u003e\n\u003ctd\u003eBMH0703P16A2A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGTIN\u003c\/td\u003e\n\u003ctd\u003e3606485199443\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eSchneider Electric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRange\u003c\/td\u003e\n\u003ctd\u003eLexium 32\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDesignation\u003c\/td\u003e\n\u003ctd\u003eBMH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eServo motor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eContinuous Stall Torque\u003c\/td\u003e\n\u003ctd\u003e3.4 N·m with LXM32.D18N4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePeak Stall Torque\u003c\/td\u003e\n\u003ctd\u003e10.2 N·m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNominal Output Power\u003c\/td\u003e\n\u003ctd\u003e1300 W with LXM32.D18N4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNominal Speed\u003c\/td\u003e\n\u003ctd\u003e5000 rpm with LXM32.D18N4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum Mechanical Speed\u003c\/td\u003e\n\u003ctd\u003e8000 rpm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eContinuous Stall Current\u003c\/td\u003e\n\u003ctd\u003e3.91 A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRated Supply Voltage\u003c\/td\u003e\n\u003ctd\u003e480 V three phase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Servo Drive\u003c\/td\u003e\n\u003ctd\u003eLXM32.D18N4 (400...480 V three phase)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFeedback Type\u003c\/td\u003e\n\u003ctd\u003eSingle-turn SinCos Hiperface, 32768 points\/turn\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHolding Brake\u003c\/td\u003e\n\u003ctd\u003eWithout\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShaft End\u003c\/td\u003e\n\u003ctd\u003eKeyed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShaft Diameter\u003c\/td\u003e\n\u003ctd\u003e14 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor Flange Size\u003c\/td\u003e\n\u003ctd\u003e70 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting Support\u003c\/td\u003e\n\u003ctd\u003eInternational standard flange\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRotor Inertia\u003c\/td\u003e\n\u003ctd\u003e1.67 kg.cm²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNet Weight\u003c\/td\u003e\n\u003ctd\u003e3 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Degree of Protection\u003c\/td\u003e\n\u003ctd\u003eIP54\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003eSelection Notes\u003c\/h2\u003e\u003cp\u003eAt 3.4 N·m continuous stall torque and 1300 W nominal output with the LXM32.D18N4 drive, the BMH0703P16A2A sits a step above the lower-torque BMH motor in the same family and suits higher-load axes within the same 70 mm flange footprint. It ships without a holding brake, so it is the choice for horizontal axes where the load cannot drift under gravity when the drive de-energizes; axes that need position retention on power loss should use a braked BMH variant instead. The 14 mm keyed shaft end transmits torque directly without relying on a friction clamp.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eWithin the Lexium 32 line, this torque and current class suits conveyor and indexing axes, winding stations, and small robotic joints that run horizontally and do not need the drive-off brake holding function. The 70 mm flange keeps it mechanically interchangeable with other BMH motors in the same frame for mixed-axis machine designs.\u003c\/p\u003e","brand":"Schneider Electric","offers":[{"title":"Default Title","offer_id":54073861374235,"sku":"BMH0703P16A2A","price":667.55,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0903\/7722\/4475\/files\/schneider-electric-bmh0703p16a2a-bmh-servo-motor.jpg?v=1790836211","url":"https:\/\/stoklink.com\/products\/schneider-electric-bmh0703p16a2a","provider":"Stoklink","version":"1.0","type":"link"}