{"title":"Schneider ATS01 Soft Starters","description":null,"products":[{"product_id":"schneider-electric-ats01n103ft-ats01","title":"ATS01N103FT, ATS01 Series Soft Starter, 1,1 kW, 3 A, 230 to 400V AC","description":"\u003cdiv\u003e\n\u003csection\u003e\n\u003ch2\u003eSchneider Electric ATS01 Soft Starter Series – Overview\u003c\/h2\u003e\n\u003cp\u003eSchneider Electric ATS01 soft starters are compact and cost-effective motor starting solutions designed for basic soft starting of asynchronous motors in standard industrial applications. The ATS01 series focuses on reducing mechanical stress and limiting starting current during motor acceleration, offering a simple and reliable alternative to direct-on-line starting. With a straightforward design and minimal configuration requirements, ATS01 soft starters are well suited for pumps, fans, compressors, and other simple motor-driven machines where basic motor starting control is sufficient.\u003c\/p\u003e\n\u003c\/section\u003e\n\u003chr\u003e\n\u003csection\u003e\n\u003ch3\u003eProduct Description: Schneider Electric ATS01N103FT\u003c\/h3\u003e\n\u003cp\u003eThe Schneider Electric ATS01N103FT is a compact DIN-rail soft starter rated for 3 A and intended for straightforward industrial motor starting tasks. It supports a wide supply voltage range (nominally 110–480 V AC and with verified limits of approximately 99–528 V) and is suitable for small asynchronous motors: verified motor power ratings include approximately 0.37 kW for single-phase 230 V motors, 0.55 kW (three-phase) at around 230 V and up to 1.1 kW (three-phase) at around 400 V. The unit uses a voltage-ramp (phase-angle) control method to limit inrush current and reduce mechanical stress during acceleration. ATS01N103FT includes an integrated bypass contact and is intended for simple machines such as pumps, fans, compressors, conveyors and automatic doors where basic soft starting (no advanced torque or multi-step control) is required. Key practical advantages are its very small 22.5 mm width for tight control panels, simple two‑setting configuration for quick commissioning, and IP20 enclosure for panel mounting.\u003c\/p\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch3\u003eKey Soft Starter Attributes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated Operational Current (Ie):\u003c\/strong\u003e 3 A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor Power Range:\u003c\/strong\u003e ~0.37 kW (1‑phase 230 V); 0.55 kW (3‑phase 230 V); 1.1 kW (3‑phase 400 V)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupply Voltage:\u003c\/strong\u003e Nominal 110–480 V AC (verified operating limits ~99–528 V AC)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eControl Method:\u003c\/strong\u003e Voltage ramp (soft start \/ phase-angle control)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt-in Bypass:\u003c\/strong\u003e Yes (integrated bypass contact)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor Protection Functions:\u003c\/strong\u003e Basic overload\/starting current management (no integrated advanced torque control)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCommunication Interfaces:\u003c\/strong\u003e — (no communication interface confirmed for this model)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure \/ Protection Class:\u003c\/strong\u003e IP20 (panel enclosure mounting)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch3\u003eFrequently Asked Questions (FAQ)\u003c\/h3\u003e\n\u003cdiv\u003e\n\u003ch4\u003eWhat motor sizes can ATS01N103FT start?\u003c\/h4\u003e\n\u003cp\u003eVerified ratings: approximately 0.37 kW for single‑phase 230 V motors, 0.55 kW for three‑phase at ~230 V, and 1.1 kW for three‑phase at ~400 V.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch4\u003eWhat supply voltages does the ATS01N103FT support?\u003c\/h4\u003e\n\u003cp\u003eThe unit is specified for a wide nominal voltage range 110–480 V AC, with documented operating limits near 99–528 V AC and operation at 50\/60 Hz.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch4\u003eDoes this model include an internal bypass?\u003c\/h4\u003e\n\u003cp\u003eYes — ATS01N103FT is supplied with an integrated bypass contact to reduce dissipation and noise after start-up.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch4\u003eCan I use ATS01N103FT for heavy-duty torque control or multi-step starts?\u003c\/h4\u003e\n\u003cp\u003eNo. This ATS01 model provides a basic voltage‑ramp soft start intended for simple machines; it does not include advanced torque control or multi-step starting functions.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\u003c\/div\u003e","brand":"Schneider Electric","offers":[{"title":"Default Title","offer_id":50230282551579,"sku":"ATS01N103FT","price":103.67,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0903\/7722\/4475\/files\/schneider-electric-ats01n103ft-ats01-to-400v-ac_b271e219-73ba-4982-a2f5-2ec5f13c5c81.jpg?v=1777185246"},{"product_id":"schneider-electric-ats01n106ft-ats01","title":"ATS01N106FT, ATS01 Series Soft Starter, 2,2 kW, 6 A, 230 to 400V AC","description":"\u003cdiv\u003e\n\u003csection id=\"series-overview\"\u003e \u003ch2\u003eSchneider Electric ATS01 Soft Starter Series – Overview\u003c\/h2\u003e \u003cp\u003e Schneider Electric ATS01 soft starters are compact and cost-effective motor starting solutions designed for basic soft starting of asynchronous motors in standard industrial applications. The ATS01 series focuses on reducing mechanical stress and limiting starting current during motor acceleration, offering a simple and reliable alternative to direct-on-line starting. With a straightforward design and minimal configuration requirements, ATS01 soft starters are well suited for pumps, fans, compressors, and other simple motor-driven machines where basic motor starting control is sufficient. \u003c\/p\u003e\n\u003c\/section\u003e \u003chr\u003e \u003csection id=\"product-description\"\u003e \u003ch3\u003eProduct Description: ATS01N106FT\u003c\/h3\u003e \u003cp\u003e The Schneider Electric ATS01N106FT is an Altistart 01 soft starter rated for 6 A nominal current and designed for wide-voltage installations. It supports a supply voltage range from 110 V up to 480 V AC, making it suitable for both low-voltage single-phase and three-phase systems commonly found in industrial control panels. Typical motor compatibility includes small asynchronous motors — documented examples are 0.75 kW at 230 V and up to 2.2 kW at 400 V — which makes the unit appropriate for light-duty pumps, fans, conveyors and compressors on simple machines. The ATS01N106FT uses a voltage-ramp start method to limit inrush current and reduce mechanical stress during acceleration, includes an internal bypass contactor to reduce heat losses after starting, and is supplied in an IP20 enclosure for panel mounting. This model does not include integrated motor overload protection or advanced communications; it is targeted at applications requiring a compact, easy-to-configure motor soft starter for basic industrial motor starting and to extend mechanical and electrical equipment life. \u003c\/p\u003e\n\u003c\/section\u003e \u003csection id=\"technical-attributes\"\u003e \u003ch3\u003eKey Soft Starter Attributes\u003c\/h3\u003e \u003cul\u003e \u003cli\u003e\n\u003cstrong\u003eRated Operational Current (Ie):\u003c\/strong\u003e 6 A\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eMotor Power Range:\u003c\/strong\u003e Example: 0.75 kW at 230 V; up to 2.2 kW at 400 V\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eSupply Voltage:\u003c\/strong\u003e 110…480 V AC (wide range)\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eControl Method:\u003c\/strong\u003e Voltage ramp (soft start)\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eBuilt-in Bypass:\u003c\/strong\u003e Yes (internal bypass contactor)\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eMotor Protection Functions:\u003c\/strong\u003e No integrated motor overload protection\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eEnclosure \/ Protection Class:\u003c\/strong\u003e IP20 (panel mounting)\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eUtilisation Category:\u003c\/strong\u003e AC-53B (EN\/IEC 60947-4-2)\u003c\/li\u003e \u003c\/ul\u003e\n\u003c\/section\u003e \u003csection id=\"technical-faq\"\u003e \u003ch3\u003eFrequently Asked Questions (FAQ)\u003c\/h3\u003e \u003cdiv class=\"faq-item\"\u003e \u003ch4\u003eWhat voltage range does the ATS01N106FT support?\u003c\/h4\u003e \u003cp\u003eThe ATS01N106FT supports a wide supply voltage range from 110 V to 480 V AC.\u003c\/p\u003e \u003c\/div\u003e \u003cdiv class=\"faq-item\"\u003e \u003ch4\u003eWhat motor sizes can this soft starter handle?\u003c\/h4\u003e \u003cp\u003eDocumented examples include 0.75 kW at 230 V and up to 2.2 kW at 400 V; it is intended for small motors on simple machines.\u003c\/p\u003e \u003c\/div\u003e \u003cdiv class=\"faq-item\"\u003e \u003ch4\u003eDoes the ATS01N106FT include a bypass contactor?\u003c\/h4\u003e \u003cp\u003eYes — an internal bypass contactor is provided to reduce dissipation after the motor has started.\u003c\/p\u003e \u003c\/div\u003e \u003cdiv class=\"faq-item\"\u003e \u003ch4\u003eDoes this model provide built-in motor overload protection or communications?\u003c\/h4\u003e \u003cp\u003eNo. The ATS01N106FT does not include integrated motor overload protection or communication interfaces; external protection and monitoring are required if needed.\u003c\/p\u003e \u003c\/div\u003e\n\u003c\/section\u003e\n\u003c\/div\u003e","brand":"Schneider Electric","offers":[{"title":"Default Title","offer_id":50230282617115,"sku":"ATS01N106FT","price":113.41,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0903\/7722\/4475\/files\/schneider-electric-ats01n106ft-ats01-to-400v-ac_22ebca63-f5d6-4238-bad2-d59d58ac1d80.jpg?v=1777185251"},{"product_id":"schneider-electric-ats01n109ft-ats01","title":"ATS01N109FT, ATS01 Series Soft Starter, 4 kW, 9 A, 230 to 400V AC","description":"\u003cdiv\u003e\n\u003csection id=\"series-overview\"\u003e \u003ch2\u003eSchneider Electric ATS01 Soft Starter Series – Overview\u003c\/h2\u003e \u003cp\u003e Schneider Electric ATS01 soft starters are compact and cost-effective motor starting solutions designed for basic soft starting of asynchronous motors in standard industrial applications. The ATS01 series focuses on reducing mechanical stress and limiting starting current during motor acceleration, offering a simple and reliable alternative to direct-on-line starting. With a straightforward design and minimal configuration requirements, ATS01 soft starters are well suited for pumps, fans, compressors, and other simple motor-driven machines where basic motor starting control is sufficient. \u003c\/p\u003e\n\u003c\/section\u003e \u003chr\u003e \u003csection id=\"product-description\"\u003e \u003ch3\u003eProduct Description: ATS01N109FT\u003c\/h3\u003e \u003cp\u003e The Schneider Electric ATS01N109FT is a compact Altistart 01 soft starter rated for 9 A nominal operational current, designed for simple industrial motor starting tasks. It accepts a wide supply voltage range from 110 V to 480 V AC and is suitable for inline three-phase motor powers up to approximately 1.5 kW at 230 V and 4 kW at 400 V (motor power ratings depend on wiring and voltage). The unit is DIN-rail or panel mountable (45 mm width), includes an internal bypass contactor to reduce heat dissipation during run, and provides adjustable starting time and torque suppression (starting torque typically adjustable in the 30–80% range). Built for basic motor control use, the ATS01N109FT is a practical choice for small conveyors, pumps, fans, compressors and other simple motor-driven machines where space is limited and a straightforward motor soft starter is required. Confirmed environmental and mechanical specs include IP20 protection, -10 °C to 40 °C operation without derating (with derating above 40 °C), and compliance with EN\/IEC 60947-4-2. \u003c\/p\u003e\n\u003c\/section\u003e \u003csection id=\"technical-attributes\"\u003e \u003ch3\u003eKey Soft Starter Attributes\u003c\/h3\u003e \u003cul\u003e \u003cli\u003e\n\u003cstrong\u003eRated Operational Current (Ie):\u003c\/strong\u003e 9 A\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eMotor Power Range:\u003c\/strong\u003e up to ~1.5 kW at 230 V (inline); up to ~4 kW at 400 V (inline)\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eSupply Voltage:\u003c\/strong\u003e 110–480 V AC\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eControl Method:\u003c\/strong\u003e adjustable voltage ramp \/ torque suppression (starting torque adjustable ~30–80%)\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eBuilt-in Bypass:\u003c\/strong\u003e Yes (internal bypass contactor)\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eMotor Protection Functions:\u003c\/strong\u003e basic functions provided via soft start control (no integrated overload protection confirmed)\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eCommunication Interfaces:\u003c\/strong\u003e — (no communication interface confirmed)\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eEnclosure \/ Protection Class:\u003c\/strong\u003e IP20\u003c\/li\u003e \u003c\/ul\u003e\n\u003c\/section\u003e \u003csection id=\"technical-faq\"\u003e \u003ch3\u003eFrequently Asked Questions (FAQ)\u003c\/h3\u003e \u003cdiv class=\"faq-item\"\u003e \u003ch4\u003eWhat is the rated current of the ATS01N109FT?\u003c\/h4\u003e \u003cp\u003eThe ATS01N109FT is rated for 9 A nominal operational current.\u003c\/p\u003e \u003c\/div\u003e \u003cdiv class=\"faq-item\"\u003e \u003ch4\u003eWhich supply voltages does the ATS01N109FT support?\u003c\/h4\u003e \u003cp\u003eIt supports a wide supply voltage range from 110 V to 480 V AC (50–60 Hz).\u003c\/p\u003e \u003c\/div\u003e \u003cdiv class=\"faq-item\"\u003e \u003ch4\u003eDoes the ATS01N109FT include a bypass contactor?\u003c\/h4\u003e \u003cp\u003eYes. The unit includes an integrated internal bypass contactor to reduce heat dissipation during motor run.\u003c\/p\u003e \u003c\/div\u003e \u003cdiv class=\"faq-item\"\u003e \u003ch4\u003eWhat motor sizes and applications is this model suitable for?\u003c\/h4\u003e \u003cp\u003eIt is suitable for small motor-driven machines: roughly up to 1.5 kW at 230 V and up to 4 kW at 400 V (inline). Typical uses include pumps, fans, conveyors, compressors and other simple industrial loads.\u003c\/p\u003e \u003c\/div\u003e \u003cdiv class=\"faq-item\"\u003e \u003ch4\u003eWhat are the operating temperature limits and derating requirements?\u003c\/h4\u003e \u003cp\u003eRated for operation from -10 °C to 40 °C without derating; above 40 °C the current must be derated as specified by Schneider Electric (consult product documentation for exact derating curve).\u003c\/p\u003e \u003c\/div\u003e\n\u003c\/section\u003e\n\u003c\/div\u003e","brand":"Schneider Electric","offers":[{"title":"Default Title","offer_id":50230282846491,"sku":"ATS01N109FT","price":118.28,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0903\/7722\/4475\/files\/schneider-electric-ats01n109ft-ats01-to-400v-ac_28060c14-cfbf-4fd7-88a3-ab6d40395f0f.jpg?v=1777185255"},{"product_id":"schneider-electric-ats01n112ft-ats01","title":"ATS01N112FT, ATS01 Series Soft Starter, 5,5 kW, 12 A, 230 to 400V AC","description":"\u003cdiv\u003e\n\u003csection id=\"series-overview\"\u003e \u003ch2\u003eSchneider Electric ATS01 Soft Starter Series – Overview\u003c\/h2\u003e \u003cp\u003e Schneider Electric ATS01 soft starters are compact and cost-effective motor starting solutions designed for basic soft starting of asynchronous motors in standard industrial applications. The ATS01 series focuses on reducing mechanical stress and limiting starting current during motor acceleration, offering a simple and reliable alternative to direct-on-line starting. With a straightforward design and minimal configuration requirements, ATS01 soft starters are well suited for pumps, fans, compressors, and other simple motor-driven machines where basic motor starting control is sufficient. \u003c\/p\u003e\n\u003c\/section\u003e \u003chr\u003e \u003csection id=\"product-description\"\u003e \u003ch3\u003eProduct Description: Schneider Electric ATS01N112FT\u003c\/h3\u003e \u003cp\u003e The Schneider Electric ATS01N112FT is a compact ATS01-series motor soft starter with a rated operational current of 12 A and a wide supply voltage range (nominally 110…480 V). It is sized for small to medium asynchronous motors — typical in-line motor ratings quoted for this model include approximately 1.5 kW for single-phase 230 V motors, 2.2 kW for three-phase 230 V motors and up to 5.5 kW for three-phase 400 V motors (manufacturer power-range groupings also list 1.1–2 kW at 200–240 V 1‑phase, 2.2–3 kW at 200–240 V 3‑phase and 4–6 kW at 380–440 V 3‑phase). The device uses a voltage-ramp soft start (start with voltage ramp) with adjustable starting time (1 to 5 s) to limit inrush current and reduce mechanical stress during acceleration. The ATS01N112FT includes an internal bypass to reduce heat dissipation once the motor reaches speed and is designed for simple machine applications — pumps, fans and compressors — where basic soft starting and low-configuration operation are required. It is a compact, IP20-protected unit with no integrated motor overload relay, and it accepts common control supply voltages (control supply options include 110–240 V AC and 24 V DC as specified by Schneider Electric). \u003c\/p\u003e\n\u003c\/section\u003e \u003csection id=\"technical-attributes\"\u003e \u003ch3\u003eKey Soft Starter Attributes\u003c\/h3\u003e \u003cul\u003e \u003cli\u003e\n\u003cstrong\u003eRated Operational Current (Ie):\u003c\/strong\u003e 12 A\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eMotor Power Range:\u003c\/strong\u003e 1.1–2 kW (200–240 V 1‑phase); 2.2–3 kW (200–240 V 3‑phase); 4–6 kW (380–440 V 3‑phase). Manufacturer examples: 1.5 kW (1‑phase 230 V), 2.2 kW (3‑phase 230 V), 5.5 kW (3‑phase 400 V).\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eSupply Voltage:\u003c\/strong\u003e 110…480 V (nominal supply range)\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eControl Method:\u003c\/strong\u003e Voltage ramp (start with voltage ramp), adjustable start time 1–5 s\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eBuilt-in Bypass:\u003c\/strong\u003e Yes (internal bypass)\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eMotor Protection Functions:\u003c\/strong\u003e No integrated motor overload protection (requires external protection)\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eControl Supply Voltage:\u003c\/strong\u003e 110–240 V AC and 24 V DC (control supply options)\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eEnclosure \/ Protection Class:\u003c\/strong\u003e IP20\u003c\/li\u003e \u003c\/ul\u003e\n\u003c\/section\u003e \u003csection id=\"technical-faq\"\u003e \u003ch3\u003eFrequently Asked Questions (FAQ)\u003c\/h3\u003e \u003cdiv class=\"faq-item\"\u003e \u003ch4\u003eWhat motor sizes does the ATS01N112FT support?\u003c\/h4\u003e \u003cp\u003eThe ATS01N112FT is specified for small to medium motors: manufacturer power-groupings cover roughly 1.1–2 kW (200–240 V single‑phase), 2.2–3 kW (200–240 V three‑phase) and 4–6 kW (380–440 V three‑phase); example ratings cited include 1.5 kW (230 V 1‑ph), 2.2 kW (230 V 3‑ph) and 5.5 kW (400 V 3‑ph).\u003c\/p\u003e \u003c\/div\u003e \u003cdiv class=\"faq-item\"\u003e \u003ch4\u003eWhat is the supply voltage range for this soft starter?\u003c\/h4\u003e \u003cp\u003eThe unit accepts a wide supply voltage range: nominal 110…480 V (suitable for 110–480 V networks as specified by Schneider Electric).\u003c\/p\u003e \u003c\/div\u003e \u003cdiv class=\"faq-item\"\u003e \u003ch4\u003eDoes the ATS01N112FT include motor overload protection?\u003c\/h4\u003e \u003cp\u003eNo. The ATS01N112FT does not include integrated motor overload protection; an external overload or motor protector must be used where required.\u003c\/p\u003e \u003c\/div\u003e \u003cdiv class=\"faq-item\"\u003e \u003ch4\u003eCan I adjust starting behavior (time\/torque)?\u003c\/h4\u003e \u003cp\u003eYes. The starter uses a voltage-ramp start with adjustable starting time (adjustable from 1 to 5 seconds) to tailor acceleration and limit inrush current.\u003c\/p\u003e \u003c\/div\u003e \u003cdiv class=\"faq-item\"\u003e \u003ch4\u003eIs there a bypass after starting to reduce heat?\u003c\/h4\u003e \u003cp\u003eYes. The ATS01N112FT includes an internal bypass to reduce dissipation and noise after the motor reaches running speed.\u003c\/p\u003e \u003c\/div\u003e\n\u003c\/section\u003e\n\u003c\/div\u003e","brand":"Schneider Electric","offers":[{"title":"Default Title","offer_id":50230283043099,"sku":"ATS01N112FT","price":120.81,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0903\/7722\/4475\/files\/schneider-electric-ats01n112ft-ats01-to-400v-ac_fde4c3a1-9152-46bc-90c2-306a144ac188.jpg?v=1777185259"},{"product_id":"schneider-electric-ats01n125ft-ats01","title":"ATS01N125FT, ATS01 Series Soft Starter, 11 kW, 25 A, 230 to 400V AC","description":"\u003cdiv\u003e\n\u003csection id=\"series-overview\"\u003e \u003ch2\u003eSchneider Electric ATS01 Soft Starter Series – Overview\u003c\/h2\u003e \u003cp\u003e Schneider Electric ATS01 soft starters are compact and cost-effective motor starting solutions designed for basic soft starting of asynchronous motors in standard industrial applications. The ATS01 series focuses on reducing mechanical stress and limiting starting current during motor acceleration, offering a simple and reliable alternative to direct-on-line starting. With a straightforward design and minimal configuration requirements, ATS01 soft starters are well suited for pumps, fans, compressors, and other simple motor-driven machines where basic motor starting control is sufficient. \u003c\/p\u003e\n\u003c\/section\u003e \u003chr\u003e \u003csection id=\"product-description\"\u003e \u003ch3\u003eProduct Description: Schneider Electric ATS01N125FT\u003c\/h3\u003e \u003cp\u003e The Schneider Electric ATS01N125FT is a compact Altistart 01 soft starter rated for 25 A nominal current and a wide supply voltage range of 110–480 V AC (50\/60 Hz). It is designed for basic soft start\/stop of asynchronous motors and is typically applied to three-phase motor sizes up to about 11 kW (depending on voltage). The unit uses a voltage-ramp start method to limit inrush current and reduce mechanical stress during acceleration, making it suitable for conveyors, pumps, fans, compressors and other simple motor-driven machines that do not require advanced torque control. The ATS01N125FT is DIN-rail mountable, includes an integrated bypass to reduce dissipation during run, and has an IP20 enclosure rating — features that support tight panel layouts and straightforward installation for maintenance and procurement teams. \u003c\/p\u003e\n\u003c\/section\u003e \u003csection id=\"technical-attributes\"\u003e \u003ch3\u003eKey Soft Starter Attributes\u003c\/h3\u003e \u003cul\u003e \u003cli\u003e\n\u003cstrong\u003eRated Operational Current (Ie):\u003c\/strong\u003e 25 A\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eMotor Power Range:\u003c\/strong\u003e 2.2 – 11 kW (application dependent on supply voltage)\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eSupply Voltage:\u003c\/strong\u003e 110 – 480 V AC, 50\/60 Hz\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eControl Method:\u003c\/strong\u003e Voltage ramp (soft start \/ soft stop)\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eBuilt-in Bypass:\u003c\/strong\u003e Yes\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eEnclosure \/ Protection Class:\u003c\/strong\u003e IP20\u003c\/li\u003e \u003c\/ul\u003e\n\u003c\/section\u003e \u003csection id=\"technical-faq\"\u003e \u003ch3\u003eFrequently Asked Questions (FAQ)\u003c\/h3\u003e \u003cdiv class=\"faq-item\"\u003e \u003ch4\u003eWhat motor sizes can the ATS01N125FT handle?\u003c\/h4\u003e \u003cp\u003eThe ATS01N125FT is specified for motor power up to approximately 11 kW (three‑phase) with a nominal current rating of 25 A; lower kW ratings apply at lower supply voltages.\u003c\/p\u003e \u003c\/div\u003e \u003cdiv class=\"faq-item\"\u003e \u003ch4\u003eWhat supply voltages does the ATS01N125FT support?\u003c\/h4\u003e \u003cp\u003eIt accepts a wide supply range from 110 V to 480 V AC at 50\/60 Hz.\u003c\/p\u003e \u003c\/div\u003e \u003cdiv class=\"faq-item\"\u003e \u003ch4\u003eDoes the ATS01N125FT include a bypass contactor?\u003c\/h4\u003e \u003cp\u003eYes — the model includes an integrated bypass to minimise dissipation once the motor is at nominal speed.\u003c\/p\u003e \u003c\/div\u003e \u003cdiv class=\"faq-item\"\u003e \u003ch4\u003eWhich control method does this soft starter use?\u003c\/h4\u003e \u003cp\u003eThe ATS01N125FT uses a voltage-ramp start\/stop method to limit starting current and reduce mechanical stress.\u003c\/p\u003e \u003c\/div\u003e\n\u003c\/section\u003e\n\u003c\/div\u003e","brand":"Schneider Electric","offers":[{"title":"Default Title","offer_id":50230283108635,"sku":"ATS01N125FT","price":160.66,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0903\/7722\/4475\/files\/schneider-electric-ats01n125ft-ats01-to-400v-ac_b8905616-c6a6-48fe-87b9-b62133e247de.jpg?v=1777185262"},{"product_id":"schneider-electric-ats01n206qn-ats01","title":"ATS01N206QN, ATS01 Series Soft Starter, 2,2 kW, 6 A, 380 to 415V AC","description":"\u003cdiv\u003e\n\u003csection id=\"series-overview\"\u003e \u003ch2\u003eSchneider Electric ATS01 Soft Starter Series – Overview\u003c\/h2\u003e \u003cp\u003e Schneider Electric ATS01 soft starters are compact and cost-effective motor starting solutions designed for basic soft starting of asynchronous motors in standard industrial applications. The ATS01 series focuses on reducing mechanical stress and limiting starting current during motor acceleration, offering a simple and reliable alternative to direct-on-line starting. With a straightforward design and minimal configuration requirements, ATS01 soft starters are well suited for pumps, fans, compressors, and other simple motor-driven machines where basic motor starting control is sufficient. \u003c\/p\u003e\n\u003c\/section\u003e \u003chr\u003e \u003csection id=\"product-description\"\u003e \u003ch3\u003eProduct Description: ATS01N206QN\u003c\/h3\u003e \u003cp\u003e The Schneider Electric ATS01N206QN is a compact ATS01 series soft starter rated for 6 A continuous current and intended for three-phase supply voltages in the 380–415 V AC range. It is specified to control small asynchronous motors in the approximate power range of 1.5 kW to 2.2 kW (typical 2.2 kW at 400\/415 V). The unit provides voltage ramp soft-start and soft-stop functionality with adjustable start and stop times (commonly 1…10 s), letting you limit inrush current and reduce mechanical stress on pumps, fans and light-duty compressors. The ATS01N206QN is a no-frills, DIN-mountable soft starter with IP20 protection, simple front potentiometer adjustments (start time, stop time, start voltage threshold), status LEDs and basic I\/O for run\/stop and BOOST functions plus an end-of-start\/stop relay output—features that make it suitable for straightforward industrial motor starting tasks where compact size and ease of setup are priorities. \u003c\/p\u003e\n\u003c\/section\u003e \u003csection id=\"technical-attributes\"\u003e \u003ch3\u003eKey Soft Starter Attributes\u003c\/h3\u003e \u003cul\u003e \u003cli\u003e\n\u003cstrong\u003eRated Operational Current (Ie):\u003c\/strong\u003e 6 A\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eMotor Power Range:\u003c\/strong\u003e ~1.5 kW – 2.2 kW (at 380–415 V AC)\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eSupply Voltage:\u003c\/strong\u003e 3 × 380…415 V AC\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eControl Method:\u003c\/strong\u003e Voltage ramp (soft start \/ soft stop)\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eMotor Protection \/ Control Functions:\u003c\/strong\u003e Adjustable start\/stop ramp, start voltage threshold, BOOST function, end-of-start relay output\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eControl I\/O:\u003c\/strong\u003e Logic inputs for Run\/Stop and BOOST; logic output and one relay output (end-of-start \/ motor at standstill)\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eEnclosure \/ Protection Class:\u003c\/strong\u003e IP20\u003c\/li\u003e \u003c\/ul\u003e\n\u003c\/section\u003e \u003csection id=\"technical-faq\"\u003e \u003ch3\u003eFrequently Asked Questions (FAQ)\u003c\/h3\u003e \u003cdiv class=\"faq-item\"\u003e \u003ch4\u003eWhat supply voltage does the Schneider ATS01N206QN require?\u003c\/h4\u003e \u003cp\u003eThe ATS01N206QN is designed for three-phase supplies in the 380–415 V AC range.\u003c\/p\u003e \u003c\/div\u003e \u003cdiv class=\"faq-item\"\u003e \u003ch4\u003eWhat motor sizes is the ATS01N206QN suitable for?\u003c\/h4\u003e \u003cp\u003eIt is intended for small asynchronous motors around 1.5 kW up to 2.2 kW (typical rating at 400\/415 V).\u003c\/p\u003e \u003c\/div\u003e \u003cdiv class=\"faq-item\"\u003e \u003ch4\u003eWhat is the rated current of this soft starter?\u003c\/h4\u003e \u003cp\u003eThe rated operational current is 6 A (at 40 °C ambient as specified by the product documentation).\u003c\/p\u003e \u003c\/div\u003e \u003cdiv class=\"faq-item\"\u003e \u003ch4\u003eCan I adjust start and stop behaviour on the ATS01N206QN?\u003c\/h4\u003e \u003cp\u003eYes. The unit provides adjustable start and stop ramp settings (commonly 1…10 seconds) and an adjustable start-voltage threshold plus a BOOST input for torque boost during start.\u003c\/p\u003e \u003c\/div\u003e\n\u003c\/section\u003e\n\u003c\/div\u003e","brand":"Schneider Electric","offers":[{"title":"Default Title","offer_id":50230283206939,"sku":"ATS01N206QN","price":125.87,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0903\/7722\/4475\/files\/schneider-electric-ats01n206qn-ats01-to-415v-ac_33fc35ec-aa81-447e-a750-48bf26a8dc47.jpg?v=1777185266"},{"product_id":"schneider-electric-ats01n209qn-ats01","title":"ATS01N209QN, ATS01 Series Soft Starter, 4 kW, 9 A, 380 to 415V AC","description":"\u003cdiv\u003e\n\u003csection id=\"series-overview\"\u003e \u003ch2\u003eSchneider Electric ATS01 Soft Starter Series – Overview\u003c\/h2\u003e \u003cp\u003e Schneider Electric ATS01 soft starters are compact and cost-effective motor starting solutions designed for basic soft starting of asynchronous motors in standard industrial applications. The ATS01 series focuses on reducing mechanical stress and limiting starting current during motor acceleration, offering a simple and reliable alternative to direct-on-line starting. With a straightforward design and minimal configuration requirements, ATS01 soft starters are well suited for pumps, fans, compressors, and other simple motor-driven machines where basic motor starting control is sufficient. \u003c\/p\u003e\n\u003c\/section\u003e \u003chr\u003e \u003csection id=\"product-description\"\u003e \u003ch3\u003eProduct Description: Schneider Electric ATS01N209QN\u003c\/h3\u003e \u003cp\u003e The Schneider Electric ATS01N209QN is a compact Altistart 01 soft starter rated for 9 A nominal current and intended for three-phase supply voltages in the 380–415 V class. It is specified for motors up to 4 kW (at 400 V) and delivers a voltage-ramp start\/stop method with adjustable ramp and deceleration times (1 to 10 s). The unit provides reduced starting current and torque control in the range of approximately 30–80% of direct-on-line torque, making it suitable for light-duty industrial machines such as pumps, fans, small compressors, conveyors, automatic doors and other simple motor-driven systems. Key verified characteristics include an integrated bypass to reduce dissipation once the motor is at full speed, DIN-rail\/panel friendly compact form factor (45 mm width), and IP20 enclosure rating — attributes that simplify installation in confined control panels and OEM assemblies. \u003c\/p\u003e\n\u003c\/section\u003e \u003csection id=\"technical-attributes\"\u003e \u003ch3\u003eKey Soft Starter Attributes\u003c\/h3\u003e \u003cul\u003e \u003cli\u003e\n\u003cstrong\u003eRated Operational Current (Ie):\u003c\/strong\u003e 9 A\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eMotor Power Range:\u003c\/strong\u003e 4 kW at 380–415 V (three-phase)\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eSupply Voltage:\u003c\/strong\u003e 380…415 V AC (supply limits 342…456 V)\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eControl Method:\u003c\/strong\u003e Voltage ramp start\/stop (adjustable 1–10 s)\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eBuilt-in Bypass:\u003c\/strong\u003e Yes (integrated bypass)\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eMotor Protection Functions:\u003c\/strong\u003e No integrated motor overload protection (basic starter functions only)\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eEnclosure \/ Protection Class:\u003c\/strong\u003e IP20\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eStarting Torque:\u003c\/strong\u003e Adjustable approx. 30% to 80% of direct-on-line motor torque\u003c\/li\u003e \u003c\/ul\u003e\n\u003c\/section\u003e \u003csection id=\"technical-faq\"\u003e \u003ch3\u003eFrequently Asked Questions (FAQ)\u003c\/h3\u003e \u003cdiv class=\"faq-item\"\u003e \u003ch4\u003eWhat is the rated current of the ATS01N209QN?\u003c\/h4\u003e \u003cp\u003eThe ATS01N209QN is rated for 9 A nominal operational current.\u003c\/p\u003e \u003c\/div\u003e \u003cdiv class=\"faq-item\"\u003e \u003ch4\u003eWhich supply voltage and motor size does this model support?\u003c\/h4\u003e \u003cp\u003eIt is designed for 3-phase supplies 380–415 V AC and is specified for motors up to 4 kW at 400 V.\u003c\/p\u003e \u003c\/div\u003e \u003cdiv class=\"faq-item\"\u003e \u003ch4\u003eDoes the ATS01N209QN include a bypass contactor?\u003c\/h4\u003e \u003cp\u003eYes — the unit features an integrated bypass to reduce heat dissipation and noise once the motor reaches nominal speed.\u003c\/p\u003e \u003c\/div\u003e \u003cdiv class=\"faq-item\"\u003e \u003ch4\u003eHow is start\/stop timing configured on this starter?\u003c\/h4\u003e \u003cp\u003eStart and stop use a voltage ramp with adjustable ramp and deceleration times from 1 to 10 seconds.\u003c\/p\u003e \u003c\/div\u003e\n\u003c\/section\u003e\n\u003c\/div\u003e","brand":"Schneider Electric","offers":[{"title":"Default Title","offer_id":50230283338011,"sku":"ATS01N209QN","price":132.83,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0903\/7722\/4475\/files\/schneider-electric-ats01n209qn-ats01-to-415v-ac_b2d4eafb-0489-4ad1-98a8-530dfa6cf905.jpg?v=1777185271"},{"product_id":"schneider-electric-ats01n212qn-ats01","title":"ATS01N212QN, ATS01 Series Soft Starter, 5,5 kW, 12 A, 380 to 415V AC","description":"\u003cdiv\u003e\n\u003csection id=\"series-overview\"\u003e \u003ch2\u003eSchneider Electric ATS01 Soft Starter Series – Overview\u003c\/h2\u003e \u003cp\u003e Schneider Electric ATS01 soft starters are compact and cost-effective motor starting solutions designed for basic soft starting of asynchronous motors in standard industrial applications. The ATS01 series focuses on reducing mechanical stress and limiting starting current during motor acceleration, offering a simple and reliable alternative to direct-on-line starting. With a straightforward design and minimal configuration requirements, ATS01 soft starters are well suited for pumps, fans, compressors, and other simple motor-driven machines where basic motor starting control is sufficient. \u003c\/p\u003e\n\u003c\/section\u003e \u003chr\u003e \u003csection id=\"product-description\"\u003e \u003ch3\u003eProduct Description: Schneider Electric ATS01N212QN\u003c\/h3\u003e \u003cp\u003e The Schneider Electric ATS01N212QN is a DIN-rail Altistart 01 soft starter rated for 12 A nominal current and designed for 3-phase supply voltages in the 380–415 V class (supply limits commonly listed as 342–456 V). It is specified for motors up to 5.5 kW (three-phase, at 380–415 V), making it suitable for small to medium machines such as pumps, fans, compressors, conveyors and other simple driven equipment where controlled, low-complexity starts are required. The ATS01N212QN uses a voltage-ramp start method, includes an integrated bypass to reduce dissipation during run, and offers simple LED indication and basic I\/O for start\/stop and end-of-start signalling. Physical packaging is compact (approx. 124 × 45 × 131 mm) and the unit is IP20 rated for enclosure-mounted installations. Ambient operation is specified to 40 °C without derating, with a higher range up to 50 °C subject to current derating. \u003c\/p\u003e\n\u003c\/section\u003e \u003csection id=\"technical-attributes\"\u003e \u003ch3\u003eKey Soft Starter Attributes\u003c\/h3\u003e \u003cul\u003e \u003cli\u003e\n\u003cstrong\u003eRated Operational Current (Ie):\u003c\/strong\u003e 12 A\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eMotor Power Range:\u003c\/strong\u003e 5.5 kW (3-phase, 380–415 V)\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eSupply Voltage:\u003c\/strong\u003e 380…415 V (operating range reported 342…456 V)\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eControl Method:\u003c\/strong\u003e Voltage ramp start\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eBuilt-in Bypass:\u003c\/strong\u003e Yes (integrated bypass)\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eStarting Time Adjustment:\u003c\/strong\u003e Adjustable (typical range 1 to 10 s)\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eEnclosure \/ Protection Class:\u003c\/strong\u003e IP20\u003c\/li\u003e \u003c\/ul\u003e\n\u003c\/section\u003e \u003csection id=\"technical-faq\"\u003e \u003ch3\u003eFrequently Asked Questions (FAQ)\u003c\/h3\u003e \u003cdiv class=\"faq-item\"\u003e \u003ch4\u003eWhat motor sizes can the ATS01N212QN start?\u003c\/h4\u003e \u003cp\u003eThe ATS01N212QN is specified for motors up to 5.5 kW on a 3-phase 380–415 V supply (nominal 12 A rating).\u003c\/p\u003e \u003c\/div\u003e \u003cdiv class=\"faq-item\"\u003e \u003ch4\u003eWhat supply voltages does the ATS01N212QN support?\u003c\/h4\u003e \u003cp\u003eRated for 380–415 V three-phase operation; supplier datasheets list a wider supply limits window (about 342–456 V).\u003c\/p\u003e \u003c\/div\u003e \u003cdiv class=\"faq-item\"\u003e \u003ch4\u003eDoes this model include a bypass contactor?\u003c\/h4\u003e \u003cp\u003eYes — the ATS01N212QN includes an integrated bypass to minimise heat dissipation after the motor reaches nominal speed.\u003c\/p\u003e \u003c\/div\u003e \u003cdiv class=\"faq-item\"\u003e \u003ch4\u003eCan I adjust the start and stop times on the ATS01N212QN?\u003c\/h4\u003e \u003cp\u003eYes — starting and deceleration times are adjustable (commonly quoted range is 1 to 10 seconds for start\/stop ramps).\u003c\/p\u003e \u003c\/div\u003e\n\u003c\/section\u003e\n\u003c\/div\u003e","brand":"Schneider Electric","offers":[{"title":"Default Title","offer_id":50230283436315,"sku":"ATS01N212QN","price":149.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0903\/7722\/4475\/files\/schneider-electric-ats01n212qn-ats01-to-415v-ac_bc53fa65-a06e-4fb0-971d-6ad18c80f7e9.jpg?v=1777185275"},{"product_id":"schneider-electric-ats01n222lu-ats01","title":"ATS01N222LU, ATS01 Series Soft Starter, 11 kW, 22 A, 380 to 415V AC","description":"\u003cdiv\u003e\n\u003csection id=\"series-overview\"\u003e \u003ch2\u003eSchneider Electric ATS01 Soft Starter Series – Overview\u003c\/h2\u003e \u003cp\u003e Schneider Electric ATS01 soft starters are compact and cost-effective motor starting solutions designed for basic soft starting of asynchronous motors in standard industrial applications. The ATS01 series focuses on reducing mechanical stress and limiting starting current during motor acceleration, offering a simple and reliable alternative to direct-on-line starting. With a straightforward design and minimal configuration requirements, ATS01 soft starters are well suited for pumps, fans, compressors, and other simple motor-driven machines where basic motor starting control is sufficient. \u003c\/p\u003e\n\u003c\/section\u003e \u003chr\u003e \u003csection id=\"product-description\"\u003e \u003ch3\u003eProduct Description: ATS01N222LU\u003c\/h3\u003e \u003cp\u003e The Schneider Electric ATS01N222LU is a compact DIN-rail Altistart 01 soft starter rated for 22 A continuous operation and intended for 3-phase supply voltages of 200–240 V AC. It is suitable for motor ratings typically from about 4 kW up to 5.5 kW (approx. 5–7.5 hp) at 200–240 V, making it a practical choice for small to medium machines such as pumps, fans, compressors, conveyor drives and automated doors where simple soft starting is required. The unit uses a voltage-ramp start method with an adjustable start\/stop ramp (commonly 1 to 10 s) and provides an integrated electronic bypass to reduce heat dissipation and audible noise after starting. Physically slim (≈45 mm wide) and DIN-rail mountable, the ATS01N222LU is designed for straightforward installation and basic on-site configuration with a small number of settings and discrete control inputs for start\/stop and boost functions. \u003c\/p\u003e\n\u003c\/section\u003e \u003csection id=\"technical-attributes\"\u003e \u003ch3\u003eKey Soft Starter Attributes\u003c\/h3\u003e \u003cul\u003e \u003cli\u003e\n\u003cstrong\u003eRated Operational Current (Ie):\u003c\/strong\u003e 22 A\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eMotor Power Range:\u003c\/strong\u003e ~4 kW to 5.5 kW at 200–240 V (approximately 5–7.5 hp)\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eSupply Voltage:\u003c\/strong\u003e 200–240 V AC, 3-phase (50\/60 Hz)\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eControl Method:\u003c\/strong\u003e Voltage ramp start \/ adjustable ramp time (typ. 1–10 s)\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eBuilt-in Bypass:\u003c\/strong\u003e Yes (integrated bypass)\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eMotor Protection Functions:\u003c\/strong\u003e Integrated motor overload protection: No (starter provides start control and signalling outputs)\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eDiscrete Control \/ I\/O:\u003c\/strong\u003e Logic discrete inputs (LI1, LI2, BOOST) and relay \/ open-collector signalling outputs\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eEnclosure \/ Protection Class:\u003c\/strong\u003e IP20 (DIN-rail, panel-mountable)\u003c\/li\u003e \u003c\/ul\u003e\n\u003c\/section\u003e \u003csection id=\"technical-faq\"\u003e \u003ch3\u003eFrequently Asked Questions (FAQ)\u003c\/h3\u003e \u003cdiv class=\"faq-item\"\u003e \u003ch4\u003eWhat is the maximum continuous current for the ATS01N222LU?\u003c\/h4\u003e \u003cp\u003eThe ATS01N222LU is rated for 22 A continuous (Ie) operation.\u003c\/p\u003e \u003c\/div\u003e \u003cdiv class=\"faq-item\"\u003e \u003ch4\u003eWhich motor sizes and voltage class does this soft starter support?\u003c\/h4\u003e \u003cp\u003eIt is intended for 3-phase motors on 200–240 V AC supplies, typically around 4 kW up to 5.5 kW (≈5–7.5 hp) depending on application and duty.\u003c\/p\u003e \u003c\/div\u003e \u003cdiv class=\"faq-item\"\u003e \u003ch4\u003eDoes the ATS01N222LU include a bypass contactor?\u003c\/h4\u003e \u003cp\u003eYes — the model includes an integrated electronic bypass to reduce heat and noise after the motor reaches line voltage.\u003c\/p\u003e \u003c\/div\u003e \u003cdiv class=\"faq-item\"\u003e \u003ch4\u003eHow is start\/stop timing configured on this model?\u003c\/h4\u003e \u003cp\u003eStart and stop ramp times are adjustable (commonly configurable in the 1 to 10 second range) using the unit’s simple configuration controls.\u003c\/p\u003e \u003c\/div\u003e\n\u003c\/section\u003e\n\u003c\/div\u003e","brand":"Schneider Electric","offers":[{"title":"Default Title","offer_id":50230283534619,"sku":"ATS01N222LU","price":208.73,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0903\/7722\/4475\/files\/schneider-electric-ats01n222lu-ats01-to-415v-ac_b63883d8-692d-4d85-b02a-ac89099213dd.jpg?v=1777185279"},{"product_id":"schneider-electric-ats01n222qn-ats01","title":"ATS01N222QN, ATS01 Series Soft Starter, 11 kW, 22 A, 380 to 415V AC","description":"\u003cdiv\u003e\n\u003csection id=\"series-overview\"\u003e \u003ch2\u003eSchneider Electric ATS01 Soft Starter Series – Overview\u003c\/h2\u003e \u003cp\u003e Schneider Electric ATS01 soft starters are compact and cost-effective motor starting solutions designed for basic soft starting of asynchronous motors in standard industrial applications. The ATS01 series focuses on reducing mechanical stress and limiting starting current during motor acceleration, offering a simple and reliable alternative to direct-on-line starting. With a straightforward design and minimal configuration requirements, ATS01 soft starters are well suited for pumps, fans, compressors, and other simple motor-driven machines where basic motor starting control is sufficient. \u003c\/p\u003e\n\u003c\/section\u003e \u003chr\u003e \u003csection id=\"product-description\"\u003e \u003ch3\u003eProduct Description: Schneider Electric ATS01N222QN\u003c\/h3\u003e \u003cp\u003e The Schneider Electric ATS01N222QN is a compact reduced-voltage soft starter with a rated operational current of 22 A designed for three-phase 380–415 V AC motor supplies. Its nominal motor power compatibility is in the 7.5–11 kW range (depending on voltage and motor rating), making this unit appropriate for standard industrial loads such as pumps, fans and compressors where straightforward soft starting is required. The ATS01N222QN provides basic soft-start functionality to limit inrush current and reduce mechanical stress at start-up while keeping setup and configuration minimal — a practical option for procurement teams seeking a low-complexity motor soft starter for common industrial motor starting applications. \u003c\/p\u003e\n\u003c\/section\u003e \u003csection id=\"technical-attributes\"\u003e \u003ch3\u003eKey Soft Starter Attributes\u003c\/h3\u003e \u003cul\u003e \u003cli\u003e\n\u003cstrong\u003eRated Operational Current (Ie):\u003c\/strong\u003e 22 A\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eMotor Power Range:\u003c\/strong\u003e 7.5 – 11 kW\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eSupply Voltage:\u003c\/strong\u003e 380 – 415 V AC (three-phase)\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eControl Method:\u003c\/strong\u003e Reduced-voltage soft starting\u003c\/li\u003e \u003c\/ul\u003e\n\u003c\/section\u003e \u003csection id=\"technical-faq\"\u003e \u003ch3\u003eFrequently Asked Questions (FAQ)\u003c\/h3\u003e \u003cdiv class=\"faq-item\"\u003e \u003ch4\u003eWhat is the rated current of the ATS01N222QN?\u003c\/h4\u003e \u003cp\u003eThe ATS01N222QN is rated for 22 A operational current.\u003c\/p\u003e \u003c\/div\u003e \u003cdiv class=\"faq-item\"\u003e \u003ch4\u003eWhich supply voltages does the ATS01N222QN support?\u003c\/h4\u003e \u003cp\u003eThis model is specified for three-phase 380–415 V AC supplies.\u003c\/p\u003e \u003c\/div\u003e \u003cdiv class=\"faq-item\"\u003e \u003ch4\u003eWhat motor sizes is the ATS01N222QN suitable for?\u003c\/h4\u003e \u003cp\u003eTypical motor compatibility is in the 7.5–11 kW range, depending on motor nameplate ratings and supply voltage.\u003c\/p\u003e \u003c\/div\u003e \u003cdiv class=\"faq-item\"\u003e \u003ch4\u003eIs the ATS01N222QN intended for complex drive or simple starting applications?\u003c\/h4\u003e \u003cp\u003eThe ATS01N222QN is designed for basic soft starting in standard industrial applications (pumps, fans, compressors) rather than advanced drive or process-control use.\u003c\/p\u003e \u003c\/div\u003e\n\u003c\/section\u003e\n\u003c\/div\u003e","brand":"Schneider Electric","offers":[{"title":"Default Title","offer_id":50230283600155,"sku":"ATS01N222QN","price":185.32,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0903\/7722\/4475\/files\/schneider-electric-ats01n222qn-ats01-to-415v-ac_45cb84e8-730f-4b7c-a309-225b4677acb2.jpg?v=1777185283"},{"product_id":"schneider-electric-ats01n232qn-ats01","title":"ATS01N232QN, ATS01 Series Soft Starter, 15 kW, 32 A, 380 to 415V AC","description":"\u003cdiv\u003e\n\u003csection id=\"series-overview\"\u003e \u003ch2\u003eSchneider Electric ATS01 Soft Starter Series – Overview\u003c\/h2\u003e \u003cp\u003e Schneider Electric ATS01 soft starters are compact and cost-effective motor starting solutions designed for basic soft starting of asynchronous motors in standard industrial applications. The ATS01 series focuses on reducing mechanical stress and limiting starting current during motor acceleration, offering a simple and reliable alternative to direct-on-line starting. With a straightforward design and minimal configuration requirements, ATS01 soft starters are well suited for pumps, fans, compressors, and other simple motor-driven machines where basic motor starting control is sufficient. \u003c\/p\u003e\n\u003c\/section\u003e \u003chr\u003e \u003csection id=\"product-description\"\u003e \u003ch3\u003eProduct Description: Schneider Electric ATS01N232QN\u003c\/h3\u003e \u003cp\u003e The Schneider Electric ATS01N232QN (Altistart 01) is a compact DIN-rail soft starter for three-phase asynchronous motors. It is rated for 32 A starter current and specified for motor power up to 15 kW on a 380–415 V supply (50–60 Hz). The unit uses a voltage-ramp start method with a built-in bypass contactor to reduce heat dissipation during run and to limit power loss after starting. Designed for simple machines — pumps, fans, conveyors and compressors — the ATS01N232QN offers a narrow 45 mm width for tight panels, an LED status display for basic diagnostics, and IP20 protection for control cabinet installation. The model does not include integrated motor overload protection and is intended where a basic, low‑cost soft start solution with minimal configuration is required. \u003c\/p\u003e\n\u003c\/section\u003e \u003csection id=\"technical-attributes\"\u003e \u003ch3\u003eKey Soft Starter Attributes\u003c\/h3\u003e \u003cul\u003e \u003cli\u003e\n\u003cstrong\u003eRated Operational Current (Ie):\u003c\/strong\u003e 32 A\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eMotor Power Range:\u003c\/strong\u003e up to 15 kW (three-phase) at 380–415 V\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eSupply Voltage:\u003c\/strong\u003e 380…415 V (50–60 Hz)\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eControl Method:\u003c\/strong\u003e Start with voltage ramp\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eBuilt-in Bypass:\u003c\/strong\u003e Yes (integrated bypass)\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eMotor Protection Functions:\u003c\/strong\u003e No integrated motor overload protection\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eEnclosure \/ Protection Class:\u003c\/strong\u003e IP20\u003c\/li\u003e \u003c\/ul\u003e\n\u003c\/section\u003e \u003csection id=\"technical-faq\"\u003e \u003ch3\u003eFrequently Asked Questions (FAQ)\u003c\/h3\u003e \u003cdiv class=\"faq-item\"\u003e \u003ch4\u003eWhat motor size can the ATS01N232QN start?\u003c\/h4\u003e \u003cp\u003eThe ATS01N232QN is specified for motors up to 15 kW on a 380–415 V three-phase supply.\u003c\/p\u003e \u003c\/div\u003e \u003cdiv class=\"faq-item\"\u003e \u003ch4\u003eWhat supply voltage and frequency does this model support?\u003c\/h4\u003e \u003cp\u003eRated supply voltage is 380…415 V and the unit supports 50–60 Hz operation.\u003c\/p\u003e \u003c\/div\u003e \u003cdiv class=\"faq-item\"\u003e \u003ch4\u003eDoes the ATS01N232QN include overload protection for the motor?\u003c\/h4\u003e \u003cp\u003eNo. This model does not include integrated motor overload protection and requires external protection if needed.\u003c\/p\u003e \u003c\/div\u003e \u003cdiv class=\"faq-item\"\u003e \u003ch4\u003eIs there a bypass contactor to reduce heat during running?\u003c\/h4\u003e \u003cp\u003eYes. The ATS01N232QN has an integrated bypass to reduce dissipation and noise after the start phase.\u003c\/p\u003e \u003c\/div\u003e\n\u003c\/section\u003e\n\u003c\/div\u003e","brand":"Schneider Electric","offers":[{"title":"Default Title","offer_id":50230283796763,"sku":"ATS01N232QN","price":232.13,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0903\/7722\/4475\/files\/schneider-electric-ats01n232qn-ats01-to-415v-ac_4a8b757f-2250-42cb-98a6-bab5755403c7.jpg?v=1777185288"},{"product_id":"schneider-electric-ats01n232rt-ats01","title":"ATS01N232RT, ATS01 Series Soft Starter, 15 kW, 32 A, 380 to 415V AC","description":"\u003cdiv\u003e\n\u003csection id=\"series-overview\"\u003e \u003ch2\u003eSchneider Electric ATS01 Soft Starter Series – Overview\u003c\/h2\u003e \u003cp\u003e Schneider Electric ATS01 soft starters are compact and cost-effective motor starting solutions designed for basic soft starting of asynchronous motors in standard industrial applications. The ATS01 series focuses on reducing mechanical stress and limiting starting current during motor acceleration, offering a simple and reliable alternative to direct-on-line starting. With a straightforward design and minimal configuration requirements, ATS01 soft starters are well suited for pumps, fans, compressors, and other simple motor-driven machines where basic motor starting control is sufficient. \u003c\/p\u003e\n\u003c\/section\u003e \u003chr\u003e \u003csection id=\"product-description\"\u003e \u003ch3\u003eProduct Description: ATS01N232RT\u003c\/h3\u003e \u003cp\u003e The Schneider ATS01N232RT is a compact three-phase motor soft starter rated for 32 A continuous current and intended for 460–480 V AC supply systems. According to Schneider-authorized datasheets and distributor listings, this model is typically applied on motors up to approximately 20 HP (three-phase at 460–480 V), making it suitable for medium-duty pumps, fans and compressors where controlled torque during acceleration reduces mechanical stress and inrush current. The ATS01N232RT uses a voltage-ramp start method with adjustable start and stop times (1 to 10 seconds) and a selectable starting torque range (approximately 30–80% of direct-on-line torque). The unit includes an internal bypass, an IP20 protection rating, basic discrete control inputs and status outputs, and is designed for straightforward, low‑configuration industrial motor starting where simple, reliable soft start functionality is required. \u003c\/p\u003e\n\u003c\/section\u003e \u003csection id=\"technical-attributes\"\u003e \u003ch3\u003eKey Soft Starter Attributes\u003c\/h3\u003e \u003cul\u003e \u003cli\u003e\n\u003cstrong\u003eRated Operational Current (Ie):\u003c\/strong\u003e 32 A.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eMotor Power Range:\u003c\/strong\u003e Up to ~20 HP (3-phase at 460–480 V).\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eSupply Voltage:\u003c\/strong\u003e 460…480 V AC (nominal).\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eControl Method:\u003c\/strong\u003e Voltage ramp start (adjustable ramp 1–10 s).\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eBuilt-in Bypass:\u003c\/strong\u003e Yes (integrated bypass).\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eMotor Protection Functions:\u003c\/strong\u003e No integrated overload protection specified on distributor data (basic motor control and start\/stop functions).\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eCommunication Interfaces:\u003c\/strong\u003e Not specified \/ no fieldbus interfaces listed.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eEnclosure \/ Protection Class:\u003c\/strong\u003e IP20.\u003c\/li\u003e \u003c\/ul\u003e\n\u003c\/section\u003e \u003csection id=\"technical-faq\"\u003e \u003ch3\u003eFrequently Asked Questions (FAQ)\u003c\/h3\u003e \u003cdiv class=\"faq-item\"\u003e \u003ch4\u003eWhat supply voltage does the ATS01N232RT require?\u003c\/h4\u003e \u003cp\u003eThe ATS01N232RT is specified for 460–480 V AC three-phase supply operation.\u003c\/p\u003e \u003c\/div\u003e \u003cdiv class=\"faq-item\"\u003e \u003ch4\u003eWhat motor size can I start with this model?\u003c\/h4\u003e \u003cp\u003eDistributor and datasheet listings indicate suitability for motors up to about 20 HP at 460–480 V (approximate maximum based on rated current 32 A).\u003c\/p\u003e \u003c\/div\u003e \u003cdiv class=\"faq-item\"\u003e \u003ch4\u003eCan I adjust start and stop times on the ATS01N232RT?\u003c\/h4\u003e \u003cp\u003eYes — start and stop ramp times are adjustable, typically from 1 to 10 seconds as documented by Schneider-authorized sources.\u003c\/p\u003e \u003c\/div\u003e \u003cdiv class=\"faq-item\"\u003e \u003ch4\u003eDoes the ATS01N232RT include an internal bypass and motor overload protection?\u003c\/h4\u003e \u003cp\u003eThe unit includes an internal bypass. Distributor data indicate no integrated motor overload protection is provided — external protection is recommended where required.\u003c\/p\u003e \u003c\/div\u003e\n\u003c\/section\u003e\n\u003c\/div\u003e","brand":"Schneider Electric","offers":[{"title":"Default Title","offer_id":50230283862299,"sku":"ATS01N232RT","price":241.62,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0903\/7722\/4475\/files\/schneider-electric-ats01n232rt-ats01-to-415v-ac_8af3bcb8-3daf-4c33-a612-03653f7c3127.jpg?v=1777185292"},{"product_id":"schneider-atsu01n206lt-atsu01-6a-soft-starter","title":"Schneider Electric ATSU01N206LT ATSU01 3P 6A 200-480V 0.75-3kW Altistart Soft Starter","description":"\u003cp\u003eThe Schneider Electric ATSU01N206LT is a 3-phase electronic soft starter from the Altistart ATSU01 series, designed to provide smooth reduced-voltage starting and stopping for AC induction motors rated 0.75 to 3kW. The ATSU01 delivers controlled torque ramp-up, limiting inrush starting current and mechanical stress on driven equipment across a wide supply voltage range of 200 to 480V AC. Ideal for pump, fan, and conveyor applications where gentle motor acceleration is critical.\u003c\/p\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCatalog Number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eATSU01\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSKU\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eATSU01N206LT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBrand\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSchneider Electric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSeries\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAltistart U01 (ATSU01)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eRated Current\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e6 A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eRated Voltage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e200 to 480 V AC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eNumber of Poles\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e3P\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMotor Power Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0.75 to 3 kW\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003eApplications \u0026amp; Use Cases\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePump Systems:\u003c\/strong\u003e Eliminates water hammer and pressure surges on start by controlling ramp-up of starting current.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFans \u0026amp; Blowers:\u003c\/strong\u003e Reduces mechanical stress on belts and couplings during acceleration with torque control.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConveyors:\u003c\/strong\u003e Prevents load shifting and belt slip through smooth, configurable motor start sequences.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompressors:\u003c\/strong\u003e Limits inrush current peaks, protecting upstream switchgear and supply infrastructure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLight Industrial Machinery:\u003c\/strong\u003e Suitable for any 0.75–3kW 3-phase AC motor application requiring electronic soft starting and reduced voltage starting.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Schneider Electric","offers":[{"title":"Default Title","offer_id":50230283960603,"sku":"ATSU01N206LT","price":333.5,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0903\/7722\/4475\/files\/schneider-electric-atsu01n206lt-atsu01-altistart-soft-starter_1d1dc1ca-8a0e-4c97-8b84-b4de8689743d.jpg?v=1777163866"},{"product_id":"schneider-atsu01n212lt-atsu01-12a-3p-soft-starter","title":"Schneider Electric ATSU01N212LT ATSU01 3P 12A 200-480V 2.2-5.5kW Altistart 01 Soft Starter","description":"\u003cp\u003eThe Schneider Electric ATSU01N212LT is a 3-phase electronic soft starter from the Altistart 01 (ATSU01) series, rated at 12A for motors from 2.2 to 5.5kW across a wide supply voltage range of 200 to 480V AC. Designed for engineers and procurement professionals who need reliable reduced-voltage motor starting, the ATSU01 delivers smooth torque control and reduced inrush current, protecting motors and driven machinery during acceleration and deceleration cycles.\u003c\/p\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCatalog Number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eATSU01\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSKU\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eATSU01N212LT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBrand\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSchneider Electric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSeries\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAltistart 01 (ATSU01)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eNumber of Poles\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e3P\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eRated Current\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e12 A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eRated Voltage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e200 to 480 V AC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMotor Power Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2.2 to 5.5 kW\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003eApplications \u0026amp; Use Cases\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePump \u0026amp; Fan Starting:\u003c\/strong\u003e The ATSU01 soft starter limits starting current and mechanical shock, extending the service life of pumps, fans, and compressors driven by three-phase induction motors.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConveyor \u0026amp; Conveying Systems:\u003c\/strong\u003e Gradual ramp-up prevents belt slippage and mechanical stress, making this motor soft starter ideal for conveyors and material-handling equipment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHVAC Equipment:\u003c\/strong\u003e Reduced voltage starting protects HVAC motors from high inrush current, reducing energy costs and wear on contactors and switchgear.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndustrial Machinery:\u003c\/strong\u003e Any 3-phase motor application in the 2.2–5.5 kW range benefits from the electronic soft starter's torque control and motor protection features.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is the supply voltage range of the ATSU01N212LT?\u003c\/strong\u003e The ATSU01 operates on a 3-phase supply of 200 to 480V AC, making it suitable for both 230V and 400–480V industrial networks.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat motor sizes does this soft starter support?\u003c\/strong\u003e The ATSU01N212LT is rated for motors from 2.2 kW up to 5.5 kW at 12A continuous current.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHow does a soft starter differ from a variable speed drive?\u003c\/strong\u003e A soft starter provides reduced-voltage starting and stopping only; it does not vary motor speed during normal operation. A VFD controls speed continuously. For fixed-speed applications requiring gentle starting, the ATSU01 is the cost-effective choice.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCan the ATSU01 be used with a bypass contactor?\u003c\/strong\u003e Yes. Once the motor reaches full speed, an external bypass contactor can be used to shunt the soft starter, reducing heat dissipation and extending the device's service life.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Schneider Electric","offers":[{"title":"Default Title","offer_id":50230284058907,"sku":"ATSU01N212LT","price":175.84,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0903\/7722\/4475\/files\/schneider-electric-atsu01n212lt-atsu01-01-soft-starter_6e756ec8-d273-4c6d-8358-11d6a6f1b7bb.jpg?v=1777163870"},{"product_id":"schneider-atsu01n222lt-atsu01-22a-soft-starter","title":"Schneider Electric ATSU01N222LT ATSU01 3P 22A 200-480V 4-11kW Altistart Soft Starter","description":"\u003cp\u003eThe Schneider Electric ATSU01N222LT is an Altistart ATSU01 series 3-phase electronic soft starter rated at 22A and 200–480V AC, designed to deliver smooth reduced-voltage motor starting for applications requiring controlled ramp-up, lower inrush current, and motor protection. The ATSU01 provides reliable torque control and starting current management for motors from 4 to 11kW, making it an efficient solution for pumps, fans, compressors, and conveyor drives.\u003c\/p\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCatalog Number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eATSU01\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSKU\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eATSU01N222LT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBrand\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSchneider Electric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSeries\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAltistart U01 (ATSU01)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eRated Current\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e22 A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eRated Voltage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e200 to 480 V AC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eNumber of Poles\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e3P\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMotor Power Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e4 to 11 kW\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003eApplications \u0026amp; Use Cases\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePump \u0026amp; Fan Drives:\u003c\/strong\u003e Reduces mechanical stress and starting current surges in centrifugal pump and fan applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompressors:\u003c\/strong\u003e Enables controlled ramp-up to minimise torque shock on compressor drive trains.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConveyor Systems:\u003c\/strong\u003e Smooth motor acceleration protects belts, gears, and mechanical couplings from high inrush torque.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHVAC Systems:\u003c\/strong\u003e Ideal for air handling units and chiller motors where soft starting extends equipment lifespan.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGeneral Industrial Machinery:\u003c\/strong\u003e Suitable for any 3-phase motor application from 4 to 11kW requiring reduced voltage starting and motor protection.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003ch3\u003eWhat is the rated current of the ATSU01N222LT?\u003c\/h3\u003e\u003cp\u003eThe ATSU01N222LT is rated at 22A, suitable for 3-phase motors up to 11kW at 480V AC.\u003c\/p\u003e\u003ch3\u003eWhat voltage range does the ATSU01 soft starter support?\u003c\/h3\u003e\u003cp\u003eThe ATSU01 operates across a supply voltage range of 200 to 480V AC, making it compatible with both 200V and 400\/480V industrial power systems.\u003c\/p\u003e\u003ch3\u003eWhat motor power range is supported?\u003c\/h3\u003e\u003cp\u003eThe ATSU01N222LT supports motors from 4kW up to 11kW depending on supply voltage.\u003c\/p\u003e\u003ch3\u003eWhat are the key benefits of using an ATSU01 soft starter?\u003c\/h3\u003e\u003cp\u003eThe ATSU01 reduces starting current (inrush), controls ramp-up torque, minimises mechanical stress on driven equipment, and helps protect the motor and connected machinery during start and stop cycles.\u003c\/p\u003e","brand":"Schneider Electric","offers":[{"title":"Default Title","offer_id":50230284124443,"sku":"ATSU01N222LT","price":218.21,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0903\/7722\/4475\/files\/schneider-electric-atsu01n222lt-atsu01-altistart-soft-starter_0e718534-929c-4077-96ac-cc9a77549879.jpg?v=1777163874"}],"url":"https:\/\/stoklink.com\/collections\/schneider-ats01.oembed","provider":"Stoklink","version":"1.0","type":"link"}